W11086780 Whirlpool Gear

Step-by-Step Guide to Replacing the Whirlpool W11086780 Gear Motor

1. Unplug your appliance and turn off all the power sources connected to it.

2. Remove the back cover of the appliance by unscrewing the screws or bolts holding it in place with a screwdriver.

3. Locate the Gear Motor on the back of the appliance and identify the connection points.

4. Disconnect the wiring harness from the Gear Motor by carefully unclipping the wires.

5. Unscrew the mounting bolts on either side of the Gear Motor and remove it from the appliance.

6. Install and secure the new Gear Motor in its place using the same mounting bolts you removed before.

7. Reconnect the wiring harness to the new Gear Motor.

8. Check the connection points to make sure they are firmly secured and the wiring is properly connected.

9. Replace the back panel and any other protective covers.

10. Plug the appliance and turn on the power sources to test the new Gear Motor.

Now that you have successfully replaced your defective Whirlpool W11086780 Gear Motor, your appliance can function properly again. Remember to be safe and take caution when handling appliances and their electrical components.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.