Online Sale!
100% Guaranteed Genuine Parts
HOSE
W10802689 Whirlpool Tub to Pump Hose
Weight : 0.591700 lbs
Dimension : 7.677100 x 5.669200 x 1.889700
About this product
W10802689 Whirlpool Tub to Pump Hose
Weight : 0.591700 lbs
Dimension : 7.677100 x 5.669200 x 1.889700
The following parts are replaced by this product
- W10622690
- W10763259
Replacing the Whirlpool W10802689 Hose-Drain
Instructions to Replace the Whirlpool W10802689 Hose-Drain
1. Start by unplugging your dishwasher from the wall outlet. This is important for safety reasons.
2. Turn off the water supply to the dishwasher by turning the valve in the wall off.
3. Remove the top panel of the dishwasher, which is typically held in place with screws.
4. Locate the existing drain hose, located under the dishwasher. Disconnect the drain hose from the dishwasher and drain.
5. Replace the existing hose with the new Whirlpool W10802689 hose. Make sure to secure it firmly in place.
6. Reconnect the water supply to the dishwasher with the valve in the wall.
7. Plug the dishwasher back into the outlet.
8. Turn on the power to the dishwasher.
9. Test the new drain hose for any leaks.
10. Replace the top panel of the dishwasher, securing it with the screws.
Congratulations! You have successfully replaced your old drain hose with the new Whirlpool W10802689 hose.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Instructions to Replace the Whirlpool W10802689 Hose-Drain
1. Start by unplugging your dishwasher from the wall outlet. This is important for safety reasons.
2. Turn off the water supply to the dishwasher by turning the valve in the wall off.
3. Remove the top panel of the dishwasher, which is typically held in place with screws.
4. Locate the existing drain hose, located under the dishwasher. Disconnect the drain hose from the dishwasher and drain.
5. Replace the existing hose with the new Whirlpool W10802689 hose. Make sure to secure it firmly in place.
6. Reconnect the water supply to the dishwasher with the valve in the wall.
7. Plug the dishwasher back into the outlet.
8. Turn on the power to the dishwasher.
9. Test the new drain hose for any leaks.
10. Replace the top panel of the dishwasher, securing it with the screws.
Congratulations! You have successfully replaced your old drain hose with the new Whirlpool W10802689 hose.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review