Online Sale!
100% Guaranteed Genuine Parts
12655103ED Whirlpool Door Hinge
12655103ED Whirlpool Door Hinge
Weight : 0.22 lbs
Dimension : 5.00 x 1.75 x 2.50
Compatible Brands
About this product
12655103ED Whirlpool Door Hinge
Weight : 0.22 lbs
Dimension : 5.00 x 1.75 x 2.50
The following parts are replaced by this product
- 67002027
Replacing the Whirlpool 12655103ED HINGE-DOOR
Are you looking to replace the hinge-door on your Whirlpool 12655103ED refrigerator? Replacing the door hinge is a fairly simple process that most can do in a few minutes. So, if you're looking for a quick and easy DIY solution, then this guide is for you.
Tools Needed:
-Philips head screwdriver
-Flat head screwdriver
-Pliers
-Putty Knife (optional)
Step 1: Disconnect the electricity
Before starting the repair, it is important to disconnect any power source connected to the refrigerator. This will help ensure your safety while performing the repair.
Step 2: Remove the Handle
The next step is to remove the handle of the refrigerator. To do this, use a Philips head screwdriver to remove the screws holding the handle in place. Take care not to strip the screws.
Step 3: Remove the Hinge Cover
Once the handle has been removed, use a flat head screwdriver to remove the hinge cover. Make sure to be careful and not damage the cover as it will need to be reattached later.
Step 4: Remove the Old Hinge
Now it is time to remove the old hinge. This can be done by using pliers to remove the screws holding it in place. Once loose, make sure to keep the screws in a safe place so they can be used when attaching the new hinge.
Step 5: Install the New Hinge
With the old hinge removed, it is now time to install the new one. Start by lining up the screws with the holes in the hinge. If there is difficulty lining them up, use a putty knife to adjust the position of the hole in the hinge. Once the screws have been lined up properly, tighten the screws with the pliers.
Step 6: Reattach the Handle and Hinge Cover
The last step is to reattach the handle and hinge cover. This can be done simply by reversing the steps used to remove them. Make sure to tighten all screws securely.
Congratulations! You have successfully replaced the hinge-door of your Whirlpool 12655103ED refrigerator. Enjoy your newly fixed refrigerator.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Are you looking to replace the hinge-door on your Whirlpool 12655103ED refrigerator? Replacing the door hinge is a fairly simple process that most can do in a few minutes. So, if you're looking for a quick and easy DIY solution, then this guide is for you.
Tools Needed:
-Philips head screwdriver
-Flat head screwdriver
-Pliers
-Putty Knife (optional)
Step 1: Disconnect the electricity
Before starting the repair, it is important to disconnect any power source connected to the refrigerator. This will help ensure your safety while performing the repair.
Step 2: Remove the Handle
The next step is to remove the handle of the refrigerator. To do this, use a Philips head screwdriver to remove the screws holding the handle in place. Take care not to strip the screws.
Step 3: Remove the Hinge Cover
Once the handle has been removed, use a flat head screwdriver to remove the hinge cover. Make sure to be careful and not damage the cover as it will need to be reattached later.
Step 4: Remove the Old Hinge
Now it is time to remove the old hinge. This can be done by using pliers to remove the screws holding it in place. Once loose, make sure to keep the screws in a safe place so they can be used when attaching the new hinge.
Step 5: Install the New Hinge
With the old hinge removed, it is now time to install the new one. Start by lining up the screws with the holes in the hinge. If there is difficulty lining them up, use a putty knife to adjust the position of the hole in the hinge. Once the screws have been lined up properly, tighten the screws with the pliers.
Step 6: Reattach the Handle and Hinge Cover
The last step is to reattach the handle and hinge cover. This can be done simply by reversing the steps used to remove them. Make sure to tighten all screws securely.
Congratulations! You have successfully replaced the hinge-door of your Whirlpool 12655103ED refrigerator. Enjoy your newly fixed refrigerator.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review