12002121 Infinite Switch (Dual)

DIY Guide to Replacing a Whirlpool 12002121 Infinite (Dual) Switch

If your Whirlpool 12002121 Infinite (Dual) Switch has stopped working, you can easily replace it yourself with this detailed DIY guide.

Tools Needed:

-Phillips Screwdriver

-Flathead Screwdriver


Step 1: Unplug the appliance from the wall socket to ensure there is no power running to it.

Step 2: Locate the faulty switch which, in this case will be a Whirlpool 12002121 Infinite (Dual) Switch.

Step 3: Using a Phillips screwdriver, unscrew the screws on either side of the switch and remove them.

Step 4: Carefully lift off the switch and disconnect any wires connected to it.

Step 5: Take the new switch and connect the wires to their corresponding terminals.

Step 6: Place the switch back into position and use a flat head screwdriver to securely tighten the screws.

Step 7: Plug the appliance back into the wall socket and turn it on to ensure the switch is working properly.

That’s all there is to it! With these easy steps, you can successfully replace your Whirlpool 12002121 Infinite (Dual) Switch.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.