241682003 Frigidaire Refrigerator Black Water Dispenser Actuator

Step 1: Unplug the refrigerator before beginning this DIY project.

Step 2: Locate the water dispenser actuator on the outside of the refrigerator. It is usually located near or on the dispenser lever.

Step 3: Using a Phillips head screwdriver, remove the two screws that are securing the old actuator in place.

Step 4: Pull the old actuator away from the refrigerator wall and disconnect the electrical wires from the back of the actuator.

Step 5: Take the new actuator and reconnect the electrical wiring. Make sure all connections are secure.

Step 6: Place the new actuator back into the hole and secure it in place by replacing the two screws.

Step 7: Plug the refrigerator back in and test the water dispenser to make sure it is working properly.

Step 8: If it is not functioning correctly, you may need to adjust the water pressure by adjusting the shutoff valve or the water filter.

Congratulations! You have successfully replaced the 241682003 Frigidaire Refrigerator Water Dispenser Actuator, Black.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.