131863007 Frigidaire Washer Idler Pulley Assembly

Step 1: Unplug your Frigidaire dryer from the wall outlet, and then shut off the gas supply if needed.

Step 2: Lift the top of the dryer up and locate the tensioner pulley outlined in your model’s manual.

Step 3: Remove the retaining screws that secure the old 131863007 Frigidaire Idler Pulley Assembly.

Step 4: Slide the old pulley off the belt, and carefully lift the idler arm away from the motor shaft pulley.

Step 5: Go ahead and replace the old pulley with the new 131863007 Frigidaire Idler Pulley Assembly.

Step 6: Position the new pulley as close to the motor shaft as possible.

Step 7: Secure the new pulley with the same screws that were used to remove the old one.

Step 8: Install a new drive belt on the pulleys, and then return the cover panel to its original position.

Step 9: Plug your Frigidaire dryer back into the wall outlet, and turn on the gas supply if needed.

And you're done! Now you know how to replace the 131863007 Frigidaire Idler Pulley Assembly.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.