All Categories

The Washer/Dryer Lid Switch Assembly ensures that the appliance door is closed while it's spinning. If the lid switch is broken, the drum will not spin. If the washer won't sp ...in but will still agitate, replacing this part may alleviate the issue. Sometimes the body of the switch cracks from slamming the appliance lid over time, or the internal switch fails and is no longer able to tell the lid is closed. This part includes the fuse and can be used for either the washer or dryer door in the a combination Maytag washer/dryer set. Replacing this part will require basic hand tools, some disassembly of the washer and novice repair experience. Remember to unplug the washer or shut off the house circuit breaker for the appliance before installing this part. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner* (item W10135699) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Washer/Dryer Lid Switch Assembly• Tools Needed: Multi screwdriver Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

Whirlpool W11545764 Float Switch We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!

Whirlpool W11197766 INTERLOCK DOOR SWITCH We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!

The Dryer Door Switch Assembly senses if the door of your dryer is properly closed. If the door handle is broken or your dryer does not start as expected, then replacing the d ...oor switch may alleviate these issues. Note that this part also replaces older 2-terminal switches. To access the part, remove the screws from the lint screen if necessary and use a putty knife to release the tabs holding the top panel of the dryer on. The door switch is located in the upper corner of the dryer next to the switch actuator. The new switch may have an extra wire that isn't used. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Helpful Tip: A multimeter can be used to test the door switch for continuity before you begin this repair.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dryer Door Switch Assembly• Tools Needed: Phillips-Head screwdriver, putty knife Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This is a genuine OEM item made by Fisher & Paykel

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

The Dryer Door Switch contains 3 metal terminals and senses if the door of your dryer is properly closed to prevent the appliance from running when the door is ajar. If your d ...ryer does not start as expected or the door will not close, then the door switch could be broken or defective and should be replaced. Note that this part is the door switch only and does not include the mounting clip. Replacing this part will require basic hand tools, minor disassembly of the dryer and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before installing this part. Helpful Tip: A multimeter can be used to test the door switch for continuity before you begin this repair.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dryer Door Switch• Tools Needed: Multi screwdriver, putty knife Read More Read Less

This is a genuine OEM part that works for some models of Frigidaire, Electrolux, Gibson, Kelvinator, Westinghouse, Crosley, Kenmore, and Tappan models.