100% Guaranteed Genuine Parts
HOSE DRAIN-WHT PLASTIC (NDEP)
803976 Speed Queen Plastic Drain Hose (White)
Weight : 11.049900 lbs
Dimension : 23.700700 x 22.244000 x 2.913300
About this product
803976 Speed Queen Plastic Drain Hose (White)
Weight : 11.049900 lbs
Dimension : 23.700700 x 22.244000 x 2.913300
DIY Guide to Replacing the Speed Queen 803976 Hose Drain-WHT Plastic (NDEP)
Are you looking to replace your Speed Queen 803976 Hose Drain-WHT Plastic (NDEP)? If so, this DIY guide will help walk you through the process.
First, gather the necessary tools and supplies for this job. You will need replacement hoses, a Phillips head screwdriver, adjustable pliers, and a flathead screwdriver.
Next, begin by turning off the power to the washing machine and disconnecting the power cord from the wall outlet.
Now it’s time to prepare the washing machine for the hose replacement. First remove the front panel by unscrewing the screws on either side of the panel. Carefully set the panel aside. Using the adjustable pliers, remove the clamps that secure the hoses to the inlet valve. Finally, remove the hose from the inlet valve.
Once the hoses are removed, take the new hoses and replace them. Make sure that the hoses fit snugly into the inlet valve and then secure them with the clamps.
Finally, replace the front panel and secure it with the screws. Once done, you can now reconnect the power cord and turn the power back on.
Congratulations! You have successfully replaced the Speed Queen 803976 Hose Drain-WHT Plastic (NDEP).
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Are you looking to replace your Speed Queen 803976 Hose Drain-WHT Plastic (NDEP)? If so, this DIY guide will help walk you through the process.
First, gather the necessary tools and supplies for this job. You will need replacement hoses, a Phillips head screwdriver, adjustable pliers, and a flathead screwdriver.
Next, begin by turning off the power to the washing machine and disconnecting the power cord from the wall outlet.
Now it’s time to prepare the washing machine for the hose replacement. First remove the front panel by unscrewing the screws on either side of the panel. Carefully set the panel aside. Using the adjustable pliers, remove the clamps that secure the hoses to the inlet valve. Finally, remove the hose from the inlet valve.
Once the hoses are removed, take the new hoses and replace them. Make sure that the hoses fit snugly into the inlet valve and then secure them with the clamps.
Finally, replace the front panel and secure it with the screws. Once done, you can now reconnect the power cord and turn the power back on.
Congratulations! You have successfully replaced the Speed Queen 803976 Hose Drain-WHT Plastic (NDEP).
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review