DE47-20196C Samsung Thermostat
Samsung Maytag Whirlpool Amana Admiral Sears Kenmore Microwave Oven THERMOSTAT DE47-20196C
Replaces DE47-20196A
Replaces DE47-20196A
Samsung Maytag Whirlpool Amana Admiral Sears Kenmore Microwave Oven THERMOSTAT DE47-20196C
Replaces DE47-20196A
Replaces DE47-20196A
Write Your Own Review
Replacing Your DE47-20196C Samsung Thermostat: A Step-by-Step Guide
Upgrading your Samsung thermostat with the DE47-20196C model can help to improve your home’s climate control system, enhance energy efficiency, and save you money. This guide will walk you through the steps for a successful installation of your new thermostat.
1. Shut down power – Before starting any installation, always make sure that the power is off. Locate your furnace or air conditioner’s power switch and flip it off.
2. Disconnect old thermostat – Remove the old thermostat on the wall carefully. Take note of the wires connected to the old thermostat so that you can connect them to the new one.
3. Mount the back plate – Measure the size of the hole in the wall and use a matching back plate to mount on the wall. Make sure it is level before securing it.
4. Connect the wires – Connect the wires from the old thermostat to the corresponding terminals of your new DE47-20196C thermostat. Carefully tighten the screws and check for any loose connections.
5. Mount the thermostat – Place the thermostat onto the back plate and secure it with screws.
6. Restore power – Restore power to the furnace or air conditioner by turning the power switch back on.
7. Configure the thermostat – Configure the settings of your new DE47-20196C Samsung thermostat as per your desired temperature and operating schedule.
Follow these steps to successfully install your DE47-20196C Samsung thermostat and start enjoying a comfortable, efficient and automated home climate control system.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Upgrading your Samsung thermostat with the DE47-20196C model can help to improve your home’s climate control system, enhance energy efficiency, and save you money. This guide will walk you through the steps for a successful installation of your new thermostat.
1. Shut down power – Before starting any installation, always make sure that the power is off. Locate your furnace or air conditioner’s power switch and flip it off.
2. Disconnect old thermostat – Remove the old thermostat on the wall carefully. Take note of the wires connected to the old thermostat so that you can connect them to the new one.
3. Mount the back plate – Measure the size of the hole in the wall and use a matching back plate to mount on the wall. Make sure it is level before securing it.
4. Connect the wires – Connect the wires from the old thermostat to the corresponding terminals of your new DE47-20196C thermostat. Carefully tighten the screws and check for any loose connections.
5. Mount the thermostat – Place the thermostat onto the back plate and secure it with screws.
6. Restore power – Restore power to the furnace or air conditioner by turning the power switch back on.
7. Configure the thermostat – Configure the settings of your new DE47-20196C Samsung thermostat as per your desired temperature and operating schedule.
Follow these steps to successfully install your DE47-20196C Samsung thermostat and start enjoying a comfortable, efficient and automated home climate control system.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
