DC93-00634A Samsung Dryer Idler Pulley

100% Guaranteed genuine parts logo
Part #: SMG DC93-00634A
100% Guaranteed genuine parts logo
Idler pulley works with some Samsung models of clothes dryers.

Weight : 0.1541 lbs
Dimension : 5.1181 x 3.5433 x 1.1811
Special Price $46.97 Regular Price $52.19 10% off
In stock
In stock
Out of stock
Enter a valid ZIP code Ok Edit
Idler pulley works with some Samsung models of clothes dryers.

Weight : 0.1541 lbs
Dimension : 5.1181 x 3.5433 x 1.1811
Write Your Own Review
Only registered users can write reviews. Please Sign in or Create an account

The following parts are replaced by this product

  1. 35001086
  2. 35001098
  3. DC96-00882C
  4. DC96-00882B
1. Begin by unplugging your Samsung dryer from the wall outlet and moving it to a safe working area such as a garage or workshop.

2. Disconnect the vent hose from the back of the dryer and remove the two screws located on the top of the back panel of the dryer.

3. Lift the back panel off and locate the old DC93-00634A Samsung Dryer Idler Pulley.

4. Remove the two bolts holding the idler pulley in place and gently pull off the old pulley.

5. Now that you have removed the old idler pulley, it's time to install the new one.

6. Start by placing the new DC93-00634A Samsung Dryer Idler Pulley on the pulley assembly and securing it with the two nuts and washers.

7. Ensure that the belt is wrapped securely around the idler pulley and aligned correctly.

8. Replace the back panel of the dryer, securing it with the two screws.

9. Plug the dryer back into the wall outlet and turn the power on.

10. Test the dryer to make sure the new idler pulley works properly.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Compatible with samsung