DA97-07020C Samsung Pantry Drawer Cover
Refrigerator pantry drawer door cover front slide assembly for some models of Samsung fridges.
Refrigerator pantry drawer door cover front slide assembly for some models of Samsung fridges.
Write Your Own Review
DIY Instructions for Replacing the DA97-07020C Samsung Pantry Drawer Cover
Replacing the DA97-07020C Samsung Pantry Drawer Cover is a simple and straightforward project that you can complete in a few easy steps. With the right tools, you can easily replace your pantry drawer cover without any professional help. Here is a DIY guide to help you get started.
Tools Needed:
-Flathead screwdriver
-Phillips head screwdriver
Step 1: Remove the Old Cover
To begin, you need to remove the old cover. Carefully unscrew the screws holding the cover in place with a flathead or Phillips head screwdriver. Once the screws have been removed, you can then pull off the old cover.
Step 2: Clean the Surface
Next, make sure to clean the surface before installing the new cover. This will help ensure that the adhesive sticks properly and that it lasts for a long time. You can use a damp cloth to wipe away any dust or debris from the surface.
Step 3: Install the New Cover
Now you can install the new cover. Peel off the protective backing from the adhesive side of the cover and carefully press it onto the surface where the old cover was. Make sure to press firmly to ensure a secure bond.
Step 4: Secure the Cover
Finally, you need to secure the cover. Use the screws that were removed from the old cover to securely fasten the new cover in place. If you don’t have the screws, you can purchase new ones from a hardware store.
That’s it! You have now successfully replaced the DA97-07020C Samsung Pantry Drawer Cover. Enjoy your newly updated pantry drawer.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing the DA97-07020C Samsung Pantry Drawer Cover is a simple and straightforward project that you can complete in a few easy steps. With the right tools, you can easily replace your pantry drawer cover without any professional help. Here is a DIY guide to help you get started.
Tools Needed:
-Flathead screwdriver
-Phillips head screwdriver
Step 1: Remove the Old Cover
To begin, you need to remove the old cover. Carefully unscrew the screws holding the cover in place with a flathead or Phillips head screwdriver. Once the screws have been removed, you can then pull off the old cover.
Step 2: Clean the Surface
Next, make sure to clean the surface before installing the new cover. This will help ensure that the adhesive sticks properly and that it lasts for a long time. You can use a damp cloth to wipe away any dust or debris from the surface.
Step 3: Install the New Cover
Now you can install the new cover. Peel off the protective backing from the adhesive side of the cover and carefully press it onto the surface where the old cover was. Make sure to press firmly to ensure a secure bond.
Step 4: Secure the Cover
Finally, you need to secure the cover. Use the screws that were removed from the old cover to securely fasten the new cover in place. If you don’t have the screws, you can purchase new ones from a hardware store.
That’s it! You have now successfully replaced the DA97-07020C Samsung Pantry Drawer Cover. Enjoy your newly updated pantry drawer.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
