DA61-02383E Samsung Refrigerator Door Closing Cam Support
Refrigerator door closer cam support for some models of Samsung fridges.
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Refrigerator door closer cam support for some models of Samsung fridges.
Write Your Own Review
The following parts are replaced by this product
- DA61-02383A
Step 1: Unplug the Samsung refrigerator from the wall socket and turn off the water supply valve.
Step 2: Take off the refrigerator door by unscrewing the top hinge cover screws and the bottom hinge cover screws.
Step 3: Carefully remove the refrigerator door and lay it on a flat, protected surface.
Step 4: Locate the closing cam support DA61-02383E, which is located on the right side of the refrigerator door.
Step 5: Unscrew the screws that hold the closing cam support DA61-02383E in place.
Step 6: Once the screws have been taken out and removed, the old closing cam support DA61-02383E can be removed.
Step 7: Place the new closing cam support DA61-02383E in the exact space where the original was removed.
Step 8: Secure the new closing cam support DA61-02383E with the screws that were taken off in Step 5.
Step 9: Reinstall the refrigerator door by screwing in the top hinge cover screws and the bottom hinge cover screws.
Step 10: Plug the Samsung refrigerator back into the wall socket and turn on the water supply valve.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Step 2: Take off the refrigerator door by unscrewing the top hinge cover screws and the bottom hinge cover screws.
Step 3: Carefully remove the refrigerator door and lay it on a flat, protected surface.
Step 4: Locate the closing cam support DA61-02383E, which is located on the right side of the refrigerator door.
Step 5: Unscrew the screws that hold the closing cam support DA61-02383E in place.
Step 6: Once the screws have been taken out and removed, the old closing cam support DA61-02383E can be removed.
Step 7: Place the new closing cam support DA61-02383E in the exact space where the original was removed.
Step 8: Secure the new closing cam support DA61-02383E with the screws that were taken off in Step 5.
Step 9: Reinstall the refrigerator door by screwing in the top hinge cover screws and the bottom hinge cover screws.
Step 10: Plug the Samsung refrigerator back into the wall socket and turn on the water supply valve.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
