EBG61108912 LG Thermistor Temperature Sensor Assembly
The EBG61108912 LG Thermistor Temperature Sensor Assembly is an advanced, reliable and accurate solution to your temperature sensing needs. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
The EBG61108912 LG Thermistor Temperature Sensor Assembly is an advanced, reliable and accurate solution to your temperature sensing needs. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Write Your Own Review
Step 1: Shut off power to your refrigerator and unplug it from the wall outlet.
Step 2: Locate the EBG61108912 LG thermistor temperature sensor assembly located in the back top-right corner of the refrigerator's interior.
Step 3: Gently pull it out from the housing and disconnect the two wiring clips connected to the sensor.
Step 4: Cut the existing wires and strip them to expose the copper at the end.
Step 5: Attach the new EBG61108912 LG thermistor temperature sensor assembly using the same wiring clips that were previously disconnected.
Step 6: Connect the two new wires together and secure them with electrical tape.
Step 7: Place the new assembly into the housing and plug the refrigerator back into the wall outlet.
Step 8: Restore power to the refrigerator and check to ensure the thermistor temperature sensor is working correctly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Step 2: Locate the EBG61108912 LG thermistor temperature sensor assembly located in the back top-right corner of the refrigerator's interior.
Step 3: Gently pull it out from the housing and disconnect the two wiring clips connected to the sensor.
Step 4: Cut the existing wires and strip them to expose the copper at the end.
Step 5: Attach the new EBG61108912 LG thermistor temperature sensor assembly using the same wiring clips that were previously disconnected.
Step 6: Connect the two new wires together and secure them with electrical tape.
Step 7: Place the new assembly into the housing and plug the refrigerator back into the wall outlet.
Step 8: Restore power to the refrigerator and check to ensure the thermistor temperature sensor is working correctly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
