AFH72909001 LG Washer Lifter Assembly
Lifter Assembly works with some LG models of Washers
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Lifter Assembly works with some LG models of Washers
Write Your Own Review
The following parts are replaced by this product
- 4433ER1005A
Replacing the AFH72909001 LG Washer Lifter Assembly
Replacing your washer's lifter assembly is a straightforward process that can be completed in a few simple steps. This guide will provide step-by-step instructions on replacing the AFH72909001 LG Washer Lifter Assembly.
1. Unplug the washer from its power source. Make sure you’ve turned off any fuses or breakers associated with the washer as well.
2. Remove the front panel of the washer. You’ll need to unscrew the fasteners and lift off the top cover.
3. Unscrew the screws that hold the old lifter assembly onto the back of the washer. Carefully remove it from the washer and set it aside.
4. Get your new lifter assembly. Position it over the back of the washer and make sure it sits flush against the mounting surface.
5. Secure the lifter assembly with the screws you removed earlier.
6. Re-secure the front panel and top cover of the washer. Turn the power back on and test the washer to make sure its working correctly.
Congratulations! You have successfully installed your new lifter assembly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing your washer's lifter assembly is a straightforward process that can be completed in a few simple steps. This guide will provide step-by-step instructions on replacing the AFH72909001 LG Washer Lifter Assembly.
1. Unplug the washer from its power source. Make sure you’ve turned off any fuses or breakers associated with the washer as well.
2. Remove the front panel of the washer. You’ll need to unscrew the fasteners and lift off the top cover.
3. Unscrew the screws that hold the old lifter assembly onto the back of the washer. Carefully remove it from the washer and set it aside.
4. Get your new lifter assembly. Position it over the back of the washer and make sure it sits flush against the mounting surface.
5. Secure the lifter assembly with the screws you removed earlier.
6. Re-secure the front panel and top cover of the washer. Turn the power back on and test the washer to make sure its working correctly.
Congratulations! You have successfully installed your new lifter assembly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
