4861ER2001D LG Washer Inner Door Seal Gasket Boot Spring Clamp Assembly
Washer inner door seal gasket boot spring clamp assembly for some models of LG washing machines.
Washer inner door seal gasket boot spring clamp assembly for some models of LG washing machines.
Write Your Own Review
Replacing a 4861ER2001D LG Washer Inner Door Seal Gasket Boot Spring Clamp Assembly
1. Unplug the washer from the wall and turn off the water supply.
2. Remove the screws from the back of the console and the top panel.
3. Carefully lift the top panel off of the machine and set aside.
4. Locate the old inner door seal gasket boot spring clamp assembly and remove it.
5. Take the new 4861ER2001D LG Washer Inner Door Seal Gasket Boot Spring Clamp Assembly and align it with the mounting holes on the machine.
6. Secure the new assembly with the necessary bolts or screws.
7. Replace the top panel and the screws on the back of the console.
8. Turn the water supply back on and plug the washer in to begin using it again.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Unplug the washer from the wall and turn off the water supply.
2. Remove the screws from the back of the console and the top panel.
3. Carefully lift the top panel off of the machine and set aside.
4. Locate the old inner door seal gasket boot spring clamp assembly and remove it.
5. Take the new 4861ER2001D LG Washer Inner Door Seal Gasket Boot Spring Clamp Assembly and align it with the mounting holes on the machine.
6. Secure the new assembly with the necessary bolts or screws.
7. Replace the top panel and the screws on the back of the console.
8. Turn the water supply back on and plug the washer in to begin using it again.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
