WH02X10279 GE Washer Locking Clip
General Electric / RCA / Hotpoint Washer LOCKING CLIP WH02X10279
We are a Factory Authorized Parts Distributor for General Electric. Trust us for all of your General Electric appliance parts and accessories needs.
We are a Factory Authorized Parts Distributor for General Electric. Trust us for all of your General Electric appliance parts and accessories needs.
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
General Electric / RCA / Hotpoint Washer LOCKING CLIP WH02X10279
We are a Factory Authorized Parts Distributor for General Electric. Trust us for all of your General Electric appliance parts and accessories needs.
We are a Factory Authorized Parts Distributor for General Electric. Trust us for all of your General Electric appliance parts and accessories needs.
Write Your Own Review
The following parts are replaced by this product
- WH2X1191
- WH02X10058
- WH02X1191
Replacing the GE Washer Locking Clip (WH02X10279)
Tools Needed:
• Philips head screwdriver
• Flathead screwdriver
• Replacement WH02X10279 GE Washer Locking Clip
Instructions:
1. Unplug your washing machine from the wall socket to disconnect the power.
2. Use a Philips head screwdriver to remove the screws which hold the top cover in place. Lift off the cover and set aside.
3. Find the locking clip on the left side of the washer's drum, near the back of the machine.
4. Use a flathead screwdriver to carefully pry the old clip off the drum.
5. Take the replacement WH02X10279 GE Washer Locking Clip and slide it into place on the drum. Ensure that the clip is securely fastened.
6. Replace the top cover of the washer and secure with the screws.
7. Plug the washing machine back in and you're done!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Tools Needed:
• Philips head screwdriver
• Flathead screwdriver
• Replacement WH02X10279 GE Washer Locking Clip
Instructions:
1. Unplug your washing machine from the wall socket to disconnect the power.
2. Use a Philips head screwdriver to remove the screws which hold the top cover in place. Lift off the cover and set aside.
3. Find the locking clip on the left side of the washer's drum, near the back of the machine.
4. Use a flathead screwdriver to carefully pry the old clip off the drum.
5. Take the replacement WH02X10279 GE Washer Locking Clip and slide it into place on the drum. Ensure that the clip is securely fastened.
6. Replace the top cover of the washer and secure with the screws.
7. Plug the washing machine back in and you're done!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
