WB44K5018 GE Oven Range Oven Bake Element
GE General Electric Hotpoint Sears Kenmore Range Oven BAKE ELEMENT WB44K5018
We are a Factory Authorized Parts Distributor for General Electric Hotpoint. Trust us for all of your General Electric Hotpoint appliance parts and accessories needs.
We are a Factory Authorized Parts Distributor for General Electric Hotpoint. Trust us for all of your General Electric Hotpoint appliance parts and accessories needs.
Weight : 8.876200 lbs
Dimension : 20.400000 x 18.900000 x 3.200000
GE General Electric Hotpoint Sears Kenmore Range Oven BAKE ELEMENT WB44K5018
We are a Factory Authorized Parts Distributor for General Electric Hotpoint. Trust us for all of your General Electric Hotpoint appliance parts and accessories needs.
We are a Factory Authorized Parts Distributor for General Electric Hotpoint. Trust us for all of your General Electric Hotpoint appliance parts and accessories needs.
Weight : 8.876200 lbs
Dimension : 20.400000 x 18.900000 x 3.200000
Write Your Own Review
Step 1: Shut off the power to your oven. The circuit breaker that powers the oven should be shut off or unplugged before you start any repair.
Step 2: Remove the back panel. Most GE ovens have a back panel that covers the oven’s components and must be removed before accessing the bake element.
Step 3: Unplug the wires. Make sure to note which wires go to which connections before unplugging them.
Step 4: Remove the mounting screws. Your GE oven will have several screws that hold the bake element in place.
Step 5: Replace the bake element. Carefully lift out the old bake element and replace it with the new one.
Step 6: Reconnect the wires. Be sure to reconnect the wiring to the new bake element in the same order you removed them.
Step 7: Secure the bake element. Use the same screws you used to remove the old element to secure the new one in place.
Step 8: Re-install the back panel. Put the panel in place, making sure all the screws are securely in place.
Step 9: Turn on the power. Once the panel has been re-installed, you can turn the power back on to the oven.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Step 2: Remove the back panel. Most GE ovens have a back panel that covers the oven’s components and must be removed before accessing the bake element.
Step 3: Unplug the wires. Make sure to note which wires go to which connections before unplugging them.
Step 4: Remove the mounting screws. Your GE oven will have several screws that hold the bake element in place.
Step 5: Replace the bake element. Carefully lift out the old bake element and replace it with the new one.
Step 6: Reconnect the wires. Be sure to reconnect the wiring to the new bake element in the same order you removed them.
Step 7: Secure the bake element. Use the same screws you used to remove the old element to secure the new one in place.
Step 8: Re-install the back panel. Put the panel in place, making sure all the screws are securely in place.
Step 9: Turn on the power. Once the panel has been re-installed, you can turn the power back on to the oven.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
