WB30T10099 GE Oven Radiant Surface Element
GE General Electric Hotpoint Sears Kenmore Range Oven Cooktop 9" Haliant Heat Top Burner WB30T10044
We are a Factory Authorized Parts Distributor for General Electric. Trust us for all of your General Electric appliance parts and accessories needs.
We are a Factory Authorized Parts Distributor for General Electric. Trust us for all of your General Electric appliance parts and accessories needs.
Weight : 11.013800 lbs
Dimension : 20.826700 x 19.448800 x 3.779500
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
GE General Electric Hotpoint Sears Kenmore Range Oven Cooktop 9" Haliant Heat Top Burner WB30T10044
We are a Factory Authorized Parts Distributor for General Electric. Trust us for all of your General Electric appliance parts and accessories needs.
We are a Factory Authorized Parts Distributor for General Electric. Trust us for all of your General Electric appliance parts and accessories needs.
Weight : 11.013800 lbs
Dimension : 20.826700 x 19.448800 x 3.779500
Write Your Own Review
The following parts are replaced by this product
- WB30T10044
- WB30T10050
1. Unplug the stove from the wall outlet.
2. Remove the grates, if applicable, and set them aside safely.
3. Remove the screws located around the edge of the cooktop.
4. Carefully lift the cooktop up and away from the stove.
5. Disconnect any wires going to the element and save for reattaching afterward.
6. Locate the GE WB30T10099 ELEMENT RADIANT 9IN DUAL and remove the mounting screws.
7. Remove the old element and install the new one.
8. Secure the new element using the mounting screws.
9. Reconnect any wiring that was disconnected earlier.
10. Place the cooktop back onto the stove and secure it with the saved screws.
11. Replace the grates, if applicable, and plug the stove back into the wall outlet. The
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Remove the grates, if applicable, and set them aside safely.
3. Remove the screws located around the edge of the cooktop.
4. Carefully lift the cooktop up and away from the stove.
5. Disconnect any wires going to the element and save for reattaching afterward.
6. Locate the GE WB30T10099 ELEMENT RADIANT 9IN DUAL and remove the mounting screws.
7. Remove the old element and install the new one.
8. Secure the new element using the mounting screws.
9. Reconnect any wiring that was disconnected earlier.
10. Place the cooktop back onto the stove and secure it with the saved screws.
11. Replace the grates, if applicable, and plug the stove back into the wall outlet. The
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
