WB17X210 GE Oven Range Cooktop Burner Receptacle Block Kit
Part #: GEN WB17X210
GE General Electric Hotpoint Sears Kenmore Range Oven Cooktop Burner Receptacle WB17X210
● Comes with purple wire
We are a Factory Authorized Parts Distributor for General Electric. Trust us for all of your General Electric appliance parts and accessories needs.
● Comes with purple wire
We are a Factory Authorized Parts Distributor for General Electric. Trust us for all of your General Electric appliance parts and accessories needs.
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
GE General Electric Hotpoint Sears Kenmore Range Oven Cooktop Burner Receptacle WB17X210
● Comes with purple wire
We are a Factory Authorized Parts Distributor for General Electric. Trust us for all of your General Electric appliance parts and accessories needs.
● Comes with purple wire
We are a Factory Authorized Parts Distributor for General Electric. Trust us for all of your General Electric appliance parts and accessories needs.
Write Your Own Review
DIY Replacement of GE Range Cooktop Burner Receptacle Block Kit (WB17X210)
Tools needed:
-Philips screwdriver
-Pliers
-Wire cutters
-Wire strippers
Instructions:
1. Unplug the appliance from its power source before beginning the repair.
2. Locate the GE Range Cooktop Burner Receptacle Block Kit (WB17X210).
3. Remove the screws securing the burner frame and the old receptacle block in place.
4. Remove the old receptacle block and discard it.
5. Carefully detach the wires from the old receptacle block.
6. Detach the wires from the burner frame with a pair of pliers.
7. Cut the wires to the required length with wire cutters and strip away about an inch of insulation from each end.
8. Attach the new GE Range Cooktop Burner Receptacle Block Kit (WB17X210) by inserting the stripped ends of the wires into the terminal block.
9. Secure the new receptacle block with the screws provided.
10. Reattach the burner frame with the screws you removed earlier.
11. Plug in your appliance and test that all burners are functioning properly.
Congratulations! Now you have successfully replaced the GE Range Cooktop Burner Receptacle Block Kit (WB17X210).
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Tools needed:
-Philips screwdriver
-Pliers
-Wire cutters
-Wire strippers
Instructions:
1. Unplug the appliance from its power source before beginning the repair.
2. Locate the GE Range Cooktop Burner Receptacle Block Kit (WB17X210).
3. Remove the screws securing the burner frame and the old receptacle block in place.
4. Remove the old receptacle block and discard it.
5. Carefully detach the wires from the old receptacle block.
6. Detach the wires from the burner frame with a pair of pliers.
7. Cut the wires to the required length with wire cutters and strip away about an inch of insulation from each end.
8. Attach the new GE Range Cooktop Burner Receptacle Block Kit (WB17X210) by inserting the stripped ends of the wires into the terminal block.
9. Secure the new receptacle block with the screws provided.
10. Reattach the burner frame with the screws you removed earlier.
11. Plug in your appliance and test that all burners are functioning properly.
Congratulations! Now you have successfully replaced the GE Range Cooktop Burner Receptacle Block Kit (WB17X210).
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.