WB02K10182 GE Oven Levelling Leg
WB02K10182 GE Oven Levelling Leg
Weight : 0.131800 lbs
Dimension : 4.212500 x 2.401500 x 1.811000
WB02K10182 GE Oven Levelling Leg
Weight : 0.131800 lbs
Dimension : 4.212500 x 2.401500 x 1.811000
Write Your Own Review
Replacing the WB02K10182 GE Leveling Leg
1. Unscrew the cabinet from the wall by using a Phillips head screwdriver. Place the screws in a safe place so that you don’t misplace them.
2. When the cabinet is detached from the wall, use a flathead screwdriver to carefully remove the leveling leg from the cabinet.
3. Clean off any debris or rust residue that may have built up on the inside of the cabinet after removing the leveling leg.
4. Take your new GE leveling leg and insert it into the hole where the old one had been. Make sure it is secure and aligned properly.
5. Screw the leveling leg into the cabinet with a Phillips head screwdriver. Make sure it is tightened firmly.
6. Reattach the cabinet onto the wall by using the same screws that you removed earlier.
7. Once the cabinet is securely mounted to the wall, adjust the leveling leg until the cabinet is even and level.
8. Test the cabinet’s stability by opening and closing the doors and drawers.
Congratulations! You have successfully replaced the GE leveling leg.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Unscrew the cabinet from the wall by using a Phillips head screwdriver. Place the screws in a safe place so that you don’t misplace them.
2. When the cabinet is detached from the wall, use a flathead screwdriver to carefully remove the leveling leg from the cabinet.
3. Clean off any debris or rust residue that may have built up on the inside of the cabinet after removing the leveling leg.
4. Take your new GE leveling leg and insert it into the hole where the old one had been. Make sure it is secure and aligned properly.
5. Screw the leveling leg into the cabinet with a Phillips head screwdriver. Make sure it is tightened firmly.
6. Reattach the cabinet onto the wall by using the same screws that you removed earlier.
7. Once the cabinet is securely mounted to the wall, adjust the leveling leg until the cabinet is even and level.
8. Test the cabinet’s stability by opening and closing the doors and drawers.
Congratulations! You have successfully replaced the GE leveling leg.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
