Whirlpool Appliance Washer Parts Pump

This Direct Drive Washer Drain Pump removes water from the appliance during the drain portion of the cleaning cycle. This model is for beltless direct-drive washers and has 2 ...large ports with a backflow flapper valve. If the washer will fill and drain the water from the tub, but doesn't agitate or spin properly, replacing this part may alleviate these issues. To replace the part, remove the washer console and disconnect the lid switch to access the old part. Remove the body from the frame of the washer by tilting at a 45-degree angle and lifting it off. Place towels down to catch any water from the hoses when removed. The new pump should slide on easily –don't force it on. If you feel resistance when sliding the pump onto the shaft, you may need to remove any shaft residue left from the previous pump. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Also make sure you turn off the hot and cold water supplies. Recommended Item: Also consider replacing the washer drive motor coupler (item 285753A) at the same time you complete this repair. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner Tablets* (item W10135699) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Direct Drive Washer Drain Pump• Tools Needed: Multi screwdriver, putty knife Read More Read Less

This Top Load Washer Drain Pump is located at the bottom of the appliance and removes water during the drain portion of the wash cycle. If your washing machine isn't draining ...as expected, replacing this part may alleviate the issue. This kit includes (1) drain pump, (1) water shield and (3) screws. Replacing this part will require basic hand tools, some disassembly of the washer and novice repair experience. You must unplug the washing machine or shut off the house circuit breaker for the appliance before installing this part. Also make sure you turn off the hot and cold water supplies. We also recommend using affresh® Washing Machine Cleaner Tablets* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Top Load Washer Drain Pump• Tools Needed: Flat-blade screwdriver, standard pliers, 5/16 in. nut driver, towels Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

Whirlpool Maytag Magic Chef KitchenAid Roper Norge Sears Kenmore Admiral Amana Clothes Clothes Washer WATER DRAIN PUMP 8182415We are a Factory Authorized Parts Distributor for ... Whirlpool Maytag. Trust us for all of your Whirlpool Maytag appliance parts and accessories needs. Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

PUMP-WATER

This Washer Drain Pump is a 2-port pump that removes waste water from your washer during the drain portion of the wash cycle. This assembly includes the drain pump and install ...ation instructions. If your washer doesn’t drain properly the pump may be clogged, damaged or defective – replacing this part may alleviate the issue. Please note: This pump is used for washing machines that do not have a lint filter and do not automatically clean out the excess built up lint. Replacing this part will require basic hand tools, some disassembly of the washing machine and novice repair experience. You must unplug the washing machine or shut off the house circuit breaker for the appliance before installing this part. Also make sure you turn off the hot and cold water supplies. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Washer Drain Pump• Tools Needed: Multi screwdriver Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.