Magic Chef Appliance Parts

The Dryer Drive Motor Assembly powers the drum of the appliance during operation. If your dryer's drum stops turning during the drying cycle, won't start at all, or the motor ...itself is loud, replacing this part may alleviate these issues. Note that the drive motor is frequently misdiagnosed; check more commonly defective parts before replacing the drive motor. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Recommended Item: Also consider replacing the Dryer Drum Belt (item WP33002535) at the same time you complete this repair.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dryer Drive Motor Assembly• Tools Needed: Multi screwdriver and socket with extension and ratchet Read More Read Less

This Washer Water Inlet Valve Assembly helps to control and balance the water temperature flowing into the washer tub by controlling the water flow into the washer. This assem ...bly includes the cold water inlet valve, hot water inlet valve, wire harness and housing. If your washer isn't filling with water as expected, replacing this part may alleviate the issue. Replacing this part will require basic hand tools, some disassembly of the washer and novice repair experience. You must unplug the washing machine or shut off the house circuit breaker for the appliance before installing this part. Also make sure you turn off the hot and cold water supplies. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner Tablets* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Washer Water Inlet Valve Assembly• Tools Needed: Multi screwdriver, 10" V-Jaw Tongue & Groove Pliers, tape, putty knife, standard pliers, nylon lanyard Read More Read Less

Vent damper works with some Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models of microwaves.

Maytag RCA Whirlpool Magic Chef KitchenAid Roper Norge Sears Kenmore Admiral Amana Microwave Oven INVERTER BOARD W10510105We are a Factory Authorized Parts Distributor for Whi ...rlpool Maytag. Trust us for all of your Whirlpool Maytag appliance parts and accessories needs. Read More Read Less

The Whirlpool W10245216 Grill-Vent Kit is the perfect addition to any kitchen. It is designed to convert your existing range hood into a ventilation system that helps to reduc ...e smoke, steam, and odors in your kitchen. This kit includes a durable black steel grille, adjustable mounting clips, and easy installation instructions. The aluminum slats on the grille help to defuse and channels the airflow within your cooking area. This grill-vent allows for maximum ventilation and improved air quality so you can enjoy healthier, safer cooking experiences. With its stylish design and easy installation, you will love having this helpful addition to your kitchen. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs! Read More Read Less

The Whirlpool 280119 BURNER-GAS is a powerful and reliable gas burner that offers efficient, consistent heating for your cooking needs. This burner features a durable, stainle ...ss steel construction for long-term use and dependability and includes a powerful 30,000 BTU/HR operated flame for rapid heating. The one-piece construction ensures a secure fit and easy installation, while the adjustable height control knob lets you adjust the flame size to suit the temperature requirements of your dish. The sleek design enhances your kitchen décor and adds a touch of style. Power up your cooking capabilities with the Whirlpool 280119 BURNER-GAS gas burner. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs! Read More Read Less

This Top Load Washer Water Level Switch is located inside the appliance and controls the level of water that enters the tub during the washing cycle. If your washer is over- o ...r under-filling the wash tub during use, then there could be an issue with the water level switch. Replacing it may alleviate these issues. This kit includes (1) new switch, (1) hose clamp (1) replacement tube and installation instructions. Note that all of the parts in this kit must be replaced at the same time you complete the switch repair. Be sure to check the tube from the side of the tub that attaches to the switch to ensure there aren't any leaks or clogs that could cause filling issues. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Also make sure you turn off the hot and cold water supplies. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner Tablets* (item W10135699) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Top Load Washer Water Level Switch Kit• Tools Needed: Multi screwdriver and putty knife (certain models) Read More Read Less

The Washer Injector Tube Assembly controls the flow rate of the water from the fill valve to the wash tub during the cleaning cycle. This kit includes (1) tube, (1) nozzle and ... (2) clamps. If your washer is leaking water during operation, replacing the nozzle and tube could alleviate this issue. Installing this assembly will require basic hand tools, some disassembly of the washing machine and intermediate repair experience. You must unplug the washer or shut off the house circuit breaker for the appliance before installing this part. Also make sure you turn off your hot and cold water supplies. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Washer Injector Tube Assembly• Tools Needed: Multi screwdriver, socket with extension Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This Washer Water-Level Pressure Switch senses and controls the water level in the washer. As the water runs through the hose while the washer tub is filling, it will push air ... against a diaphragm inside the switch. As more water enters the tub, more pressure is applied against the switch. You'll have to remove the control panel of your washer to gain access to this part. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. Remember to unplug the washing machine or shut off the house circuit breaker for the appliance before installing this item. Also be sure to turn off the hot and cold water supplies to your washer. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Washer Water-Level Pressure Switch• Tools Needed: Multi screwdriver Read More Read Less