Magic Chef Appliance Parts Mixer Parts

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

The Stand Mixer Speed Control Plate controls the speed of the stand mixer motor. The speed control plate is part of the speed control system. If the contacts aren't closing an ...d your mixer is running loud, or if the contacts have failed and your mixer is no longer turning on, replacing the control plate may alleviate these issues. To access the part, remove all attachments and the bowl of the mixer. Then remove the back cover of the mixer and the screws from the trim band. Remove the wires from the seal of the mixer in order to take the spring off of the speed control plate. Make sure you hook the spring with a needle nose pliers securely to remove. Disconnect the wires from the phase control board. You'll then be able to remove the upper two screws holding in the old speed control plate. Note: These upper two screws are where you adjust the speed of your mixer. Make sure you measure them from the back of their post to the back of the speed control plate at 3/8-in. Replacing this part will require basic hand tools, some disassembly of the stand mixer and novice repair experience. You must unplug the appliance before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Stand Mixer Speed Control Plate Assembly• Tools Needed: Multi screwdriver, needle-nose pliers Read More Read Less

This Gas Oven Torx Screw replaces any screw in your range that keeps certain components of the gas oven in place, or sealed.Measures 7-18" x 3/4" Screw is sold separately. Rep ...lacing this part will require basic hand tools, some disassembly of the oven and novice repair experience. You must unplug the oven or shut off the house circuit breaker for the appliance before installing this part. Also make sure to turn the gas valve off before the repair.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Gas Oven Torx Screw• Tools Needed: Multi screwdriver Read More Read Less

The KitchenAid® Stand Mixer Worm Drive Gear is one of the drive gears in your mixer. If the teeth of the gear are worn or damanged or if your mixer's motor is on but nothing ...is moving, you may need to replace this part. You will need to remove the planetary from the mixer, the cover on the back of the mixer and the base to access this part. Replacing this part will require basic tools, some disassembly of the stand mixer and some repair experience. You must unplug the appliance before installing this part and make sure all the attachments are removed.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) KitchenAid® Stand Mixer Worm Drive Gear• Tools Needed: Multi screwdriver Read More Read Less

Sold individually, this authentic Whirlpool/KitchenAid Stand Mixer Worm Drive Pinion Gear Assembly serves as the main drive gear system for your KitchenAid mixer. Over time, t ...hey may wear gradually, preserving the metal gears, or act as a safety mechanism by failing when overloaded. Shop with confidence with this 100% genuine, OEM replacement part Read More Read Less

The Stand Mixer Speed Control Board impacts the desired speed level of the appliance. If the contacts inside the control board (also called the speed control plate) aren't clo ...sing and your mixer is running loud or irregularly, or if the contacts have failed and your mixer is no longer turning on at all, replacing the control plate may alleviate these issues. To access the part remove the back cover of the mixer and the screws from the trim band. Remove the wires from the seal of the mixer in order to take the spring off of the speed control plate. Make sure you hook the spring with your needle nose pliers securely to remove. Disconnect the wires from the phase control board. You'll then be able to remove the upper two screws holding in the existing speed control plate. Note: These upper two screws are where you adjust the speed of your mixer; they should measure 3/8" from the back of their post to the back of the control board. Replacing this part will require basic hand tools and disassembly of the stand mixer. Previous repair experience will be helpful but is not necessary. You must unplug the appliance before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Stand Mixer Speed Control Board• Tools Needed: Multi screwdriver, needle-nose pliers Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This Stand Mixer Lift Arm is located inside the pedestal and raises or lowers the bowl when you need to use the mixer. If the existing part is damaged and you can't raise the ...bowl, replacing the lift arm may alleviate this issue. Note that you'll have to turn the appliance upside down to complete this repair. Replacing this part will require basic hand tools, some disassembly of the mixer and novice repair experience. You must unplug the appliance before installing this part and make sure all the attachments are removed.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Stand Mixer Lift Arm• Tools Needed: Multi screwdriver Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.