WPW10351279 Whirlpool Oven Vent
Whirlpool WPW10351279 VENT-OVEN. . We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Whirlpool WPW10351279 VENT-OVEN. . We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Write Your Own Review
The following parts are replaced by this product
- W10351279
Replacing the Whirlpool WPW10351279 VENT-OVEN
Replacing the Whirlpool WPW10351279 VENT-OVEN is a straightforward DIY job that can be completed with basic tools and minimal effort. This article provides easy-to-follow instructions for replacing the VENT-OVEN.
Before beginning, make sure to turn off power to the appliance, either via the circuit breaker or by unplugging the power cord.
1. Remove the oven vent grille. Carefully slide a flathead screwdriver into the slit at the top of the oven vent grille. Gently twist the screwdriver to open the grille and then pull it away from the oven.
2. Unscrew the mounting screws. With the grille removed, you will find two screws holding the vent in place. Unscrew these screws with a Phillips head screwdriver and set them aside.
3. Remove the old vent. Now the old vent will be loose and able to be pulled out from the oven. Place it on a work surface and you will be ready to install the new vent.
4. Install the new vent. Place the new vent into the same spot where the old vent was and re-insert the mounting screws. Make sure the screws are fitted tightly so that the vent is secure.
5. Reattach the grille. Slide the oven vent grille over the vent and press down until it locks into place.
Your Whirlpool WPW10351279 VENT-OVEN should now be successfully replaced. Be sure to reconnect the power once the installation is complete and test the oven to ensure proper function.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing the Whirlpool WPW10351279 VENT-OVEN is a straightforward DIY job that can be completed with basic tools and minimal effort. This article provides easy-to-follow instructions for replacing the VENT-OVEN.
Before beginning, make sure to turn off power to the appliance, either via the circuit breaker or by unplugging the power cord.
1. Remove the oven vent grille. Carefully slide a flathead screwdriver into the slit at the top of the oven vent grille. Gently twist the screwdriver to open the grille and then pull it away from the oven.
2. Unscrew the mounting screws. With the grille removed, you will find two screws holding the vent in place. Unscrew these screws with a Phillips head screwdriver and set them aside.
3. Remove the old vent. Now the old vent will be loose and able to be pulled out from the oven. Place it on a work surface and you will be ready to install the new vent.
4. Install the new vent. Place the new vent into the same spot where the old vent was and re-insert the mounting screws. Make sure the screws are fitted tightly so that the vent is secure.
5. Reattach the grille. Slide the oven vent grille over the vent and press down until it locks into place.
Your Whirlpool WPW10351279 VENT-OVEN should now be successfully replaced. Be sure to reconnect the power once the installation is complete and test the oven to ensure proper function.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
