WPW10251076 Whirlpool Icemaker
The Refrigerator Ice Maker Assembly receives water from the water inlet, holds the water in the ice mold until it freezes and then automatically ejects the ice and refills again until the ice storage bin is filled. This 6-cube replacement ice maker includes the housing and complete assembly, and is compatible with many refrigerator models with in-door ice and water dispensers. Includes (2) mounting clips. Installing the part will require basic hand tools, some disassembly of the refrigerator and novice repair experience. You must unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part. Also turn off the refrigerator's water supply before you begin. Note that this assembly does not include a bail arm; remove the bail arm from the existing ice maker to reuse with the new part. Make sure the wiring harness on the new kit matches.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Refrigerator Ice Maker Assembly
• Tools Needed: Flat blade screwdriver, 1/4" nut driver, torque screwdriver, phillips screwdriver, and a pair of locking pliers
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Refrigerator Ice Maker Assembly
• Tools Needed: Flat blade screwdriver, 1/4" nut driver, torque screwdriver, phillips screwdriver, and a pair of locking pliers
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
The Refrigerator Ice Maker Assembly receives water from the water inlet, holds the water in the ice mold until it freezes and then automatically ejects the ice and refills again until the ice storage bin is filled. This 6-cube replacement ice maker includes the housing and complete assembly, and is compatible with many refrigerator models with in-door ice and water dispensers. Includes (2) mounting clips. Installing the part will require basic hand tools, some disassembly of the refrigerator and novice repair experience. You must unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part. Also turn off the refrigerator's water supply before you begin. Note that this assembly does not include a bail arm; remove the bail arm from the existing ice maker to reuse with the new part. Make sure the wiring harness on the new kit matches.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Refrigerator Ice Maker Assembly
• Tools Needed: Flat blade screwdriver, 1/4" nut driver, torque screwdriver, phillips screwdriver, and a pair of locking pliers
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Refrigerator Ice Maker Assembly
• Tools Needed: Flat blade screwdriver, 1/4" nut driver, torque screwdriver, phillips screwdriver, and a pair of locking pliers
Write Your Own Review
The following parts are replaced by this product
- W10122576
- W10251076
How to Replace a Whirlpool WPW10251076 Icemaker
When the icemaker in your Whirlpool refrigerator stops making ice, it might be time to replace it. Replacing the icemaker is a straightforward task and can be completed in about twenty minutes. Follow these simple steps to get your fresh cubes of ice back in no time.
Tools Needed:
-Screwdriver
-Pliers
-New Replacement Icemaker (Whirlpool WPW10251076)
Instructions:
1. Unplug the refrigerator from the wall outlet and remove all food items from the freezer.
2. Remove the screws that secure the cover plate in the back of the freezer with a screwdriver.
3. Take out the ice bucket and unscrew the mounting screws that attach the icemaker to the ceiling of the freezer with a screwdriver.
4. Disconnect the electrical connections on the back of the old icemaker with a pair of pliers.
5. Remove the old icemaker from the freezer and discard it.
6. Insert the new icemaker into the space where the old one was located. Make sure it is secured firmly in place.
7. Reattach the electrical connections with the pair of pliers.
8. Secure the mounting screws on the back of the new icemaker with a screwdriver.
9. Place the ice bucket back in the freezer and replace the cover plate.
10. Reconnect the refrigerator to the wall outlet.
Congratulations! You have just successfully replaced your Whirlpool WPW10251076 icemaker. Your fridge should now be churning out ice cubes in no time.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
When the icemaker in your Whirlpool refrigerator stops making ice, it might be time to replace it. Replacing the icemaker is a straightforward task and can be completed in about twenty minutes. Follow these simple steps to get your fresh cubes of ice back in no time.
Tools Needed:
-Screwdriver
-Pliers
-New Replacement Icemaker (Whirlpool WPW10251076)
Instructions:
1. Unplug the refrigerator from the wall outlet and remove all food items from the freezer.
2. Remove the screws that secure the cover plate in the back of the freezer with a screwdriver.
3. Take out the ice bucket and unscrew the mounting screws that attach the icemaker to the ceiling of the freezer with a screwdriver.
4. Disconnect the electrical connections on the back of the old icemaker with a pair of pliers.
5. Remove the old icemaker from the freezer and discard it.
6. Insert the new icemaker into the space where the old one was located. Make sure it is secured firmly in place.
7. Reattach the electrical connections with the pair of pliers.
8. Secure the mounting screws on the back of the new icemaker with a screwdriver.
9. Place the ice bucket back in the freezer and replace the cover plate.
10. Reconnect the refrigerator to the wall outlet.
Congratulations! You have just successfully replaced your Whirlpool WPW10251076 icemaker. Your fridge should now be churning out ice cubes in no time.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
