Online Sale!
100% Guaranteed Genuine Parts
WPW10204548 Whirlpool Burner Grate
WPW10204548 Whirlpool Burner Grate
Weight : 3.021600 lbs
Dimension : 15.190000 x 14.440000 x 2.320000
Compatible Brands
About this product
WPW10204548 Whirlpool Burner Grate
Weight : 3.021600 lbs
Dimension : 15.190000 x 14.440000 x 2.320000
The following parts are replaced by this product
- W10204548
No more associated models for this part.
DIY Instructions on Replacing the Whirlpool WPW10204548 Burner Grate
1. Unplug your stove from the power source and turn off the gas valve at the wall.
2. Lift off the cooking surface of your stove. Most models have either two or four knobs that secure the cooking surface. Insert a flathead screwdriver into the release notch and lever the knob up to release the seal.
3. Pull out the burner grates and drip pans from the stovetop. Depending on the model, it may be necessary to pull out the entire burner assembly before you can access the grate.
4. Slide the new grate onto the burner assembly, making sure the notches line up with those on the assembly. Secure the new grate with the screws provided.
5. Reinstall the burners and drip pans, followed by the cooking surface. Push the knobs into place, making sure they are secure.
6. Plug your stove back into its power source and turn the gas valve back on. Test the new grate by turning on a burner and using it as you would normally.
Following these steps will help you to efficiently and safely replace your Whirlpool WPW10204548 burner grate and allow you to continue to use your stove in an efficient, safe manner.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Unplug your stove from the power source and turn off the gas valve at the wall.
2. Lift off the cooking surface of your stove. Most models have either two or four knobs that secure the cooking surface. Insert a flathead screwdriver into the release notch and lever the knob up to release the seal.
3. Pull out the burner grates and drip pans from the stovetop. Depending on the model, it may be necessary to pull out the entire burner assembly before you can access the grate.
4. Slide the new grate onto the burner assembly, making sure the notches line up with those on the assembly. Secure the new grate with the screws provided.
5. Reinstall the burners and drip pans, followed by the cooking surface. Push the knobs into place, making sure they are secure.
6. Plug your stove back into its power source and turn the gas valve back on. Test the new grate by turning on a burner and using it as you would normally.
Following these steps will help you to efficiently and safely replace your Whirlpool WPW10204548 burner grate and allow you to continue to use your stove in an efficient, safe manner.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review