WPW10178022 Whirlpool Range Cooktop Radiant Surface Element
Radiant surface element works with some Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models of range / cooktops.
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Radiant surface element works with some Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models of range / cooktops.
Write Your Own Review
The following parts are replaced by this product
- W10178022
Replacing the WPW10178022 Whirlpool Range/Cooktop Radiant Surface Element
Having trouble with your Whirlpool range or cooktop due to a faulty radiant surface element? Not to worry, replacing this element is easy and can be done in a few simple steps. Read on to learn how to DIY and replace the WPW10178022 Radiant Surface Element and get back to cooking in no time.
Tools and materials you will need:
-Phillips screwdriver
-Replacement element (WPW10178022)
-Safety gloves
Instructions
1. Disconnect the power source. To ensure safety, unplug your appliance from the power outlet and make sure all knobs are off.
2. Remove the screws. Place the Phillips screwdriver into the screws located on the bottom of the cooker and unscrew to remove the screws.
3. Remove the old element. Gently pull away the element and disconnect the wires from the terminals.
4. Install the new element. Take your new element (WPW10178022) and connect the wires onto the terminals. Then, position the element in the cavity.
5. Secure the element. Screw the screws back into the same holes using the Phillips screwdriver.
6. Reconnect the power source. Insert the power source back into the socket and turn on the range.
7. Test the element. Turn on the burner on the element and adjust to maximum heat. Allow it to heat up for a few minutes before testing it to ensure the element is working properly.
And there you have it! By following these steps, you should now be able to successfully install the WPW10178022 Whirlpool Radiant Surface Element. For any more questions or further assistance, please consult your local appliance repair expert.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Having trouble with your Whirlpool range or cooktop due to a faulty radiant surface element? Not to worry, replacing this element is easy and can be done in a few simple steps. Read on to learn how to DIY and replace the WPW10178022 Radiant Surface Element and get back to cooking in no time.
Tools and materials you will need:
-Phillips screwdriver
-Replacement element (WPW10178022)
-Safety gloves
Instructions
1. Disconnect the power source. To ensure safety, unplug your appliance from the power outlet and make sure all knobs are off.
2. Remove the screws. Place the Phillips screwdriver into the screws located on the bottom of the cooker and unscrew to remove the screws.
3. Remove the old element. Gently pull away the element and disconnect the wires from the terminals.
4. Install the new element. Take your new element (WPW10178022) and connect the wires onto the terminals. Then, position the element in the cavity.
5. Secure the element. Screw the screws back into the same holes using the Phillips screwdriver.
6. Reconnect the power source. Insert the power source back into the socket and turn on the range.
7. Test the element. Turn on the burner on the element and adjust to maximum heat. Allow it to heat up for a few minutes before testing it to ensure the element is working properly.
And there you have it! By following these steps, you should now be able to successfully install the WPW10178022 Whirlpool Radiant Surface Element. For any more questions or further assistance, please consult your local appliance repair expert.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
