Online Sale!
100% Guaranteed Genuine Parts
WP8574963 Whirlpool Knob Assembly
WP8574963 Whirlpool Knob
Weight : 0.028800 lbs
Dimension : 2.120000 x 2.120000 x 1.120000
Compatible Brands
About this product
WP8574963 Whirlpool Knob
Weight : 0.028800 lbs
Dimension : 2.120000 x 2.120000 x 1.120000
No more associated models for this part.
Replacing the Whirlpool WP8574963 KNOB: A Step-by-Step DIY Guide
Installing a new knob on your Whirlpool appliance is an easy DIY project that can help keep it looking and functioning at its best. Follow these step-by-step instructions to replace the Whirlpool WP8574963 KNOB:
1. Unplug the appliance from the wall outlet. Depending on what type of appliance you have, you may need to turn off the power switch or circuit breaker as well.
2. Remove any screws holding the knob in place with a Phillips screwdriver.
3. Carefully pull the knob off the appliance. You may need to wiggle it a bit to loosen it.
4. Clean the area around the knob to remove any dirt or debris.
5. Place the new knob on the appliance, making sure the shaft is in the correct position.
6. Insert screws (if applicable) to secure the knob and tighten with a Phillips screwdriver.
7. Plug the appliance back into the wall outlet. Turn on the power switch or circuit breaker if necessary.
You’ve successfully replaced your Whirlpool WP8574963 KNOB! Now you can take pride in knowing that you saved time and money and got your appliance working like new again.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Installing a new knob on your Whirlpool appliance is an easy DIY project that can help keep it looking and functioning at its best. Follow these step-by-step instructions to replace the Whirlpool WP8574963 KNOB:
1. Unplug the appliance from the wall outlet. Depending on what type of appliance you have, you may need to turn off the power switch or circuit breaker as well.
2. Remove any screws holding the knob in place with a Phillips screwdriver.
3. Carefully pull the knob off the appliance. You may need to wiggle it a bit to loosen it.
4. Clean the area around the knob to remove any dirt or debris.
5. Place the new knob on the appliance, making sure the shaft is in the correct position.
6. Insert screws (if applicable) to secure the knob and tighten with a Phillips screwdriver.
7. Plug the appliance back into the wall outlet. Turn on the power switch or circuit breaker if necessary.
You’ve successfully replaced your Whirlpool WP8574963 KNOB! Now you can take pride in knowing that you saved time and money and got your appliance working like new again.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review