Online Sale!
100% Guaranteed Genuine Parts
WP8541697 Whirlpool Valve
WP8541697 Whirlpool Valve
Weight : 0.000000 lbs
Dimension : 4.750000 x 4.250000 x 5.880000
Compatible Brands
About this product
WP8541697 Whirlpool Valve
Weight : 0.000000 lbs
Dimension : 4.750000 x 4.250000 x 5.880000
The following parts are replaced by this product
- 8541697
No more associated models for this part.
DIY Instructions for Replacing a Whirlpool WP8541697 VALVE
Replacing a damaged or malfunctioning water valve can help you restore water flow to your Whirlpool appliance. Here's how to replace the Whirlpool WP8541697 valve:
Materials Needed:
• Phillips head screwdriver
• Flathead screwdriver
• Adjustable wrench
• New Whirlpool WP8541697 valve
Instructions:
1. Start by turning off all electricity and water supply to the appliance. Disconnect the power cord from the wall outlet and shut off the main water supply valve.
2. Remove the access panel on the back of the appliance. This will expose the water inlet valve.
3. Use a Phillips head screwdriver to unscrew the two mounting screws securing the valve to the appliance.
4. Carefully slide the water inlet valve out of the appliance and set it aside.
5. Take your new Whirlpool WP8541697 valve and insert it into the opening, making sure it is properly seated.
6. Use the Phillips head screwdriver to re-secure the valve to the appliance.
7. Turn the water supply back on and then check for leaks. If there are no leaks, reconnect the power cord and turn the electricity back on.
8. Test the appliance to ensure the new valve is working properly.
You've successfully replaced the Whirlpool WP8541697 valve. Congrats!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing a damaged or malfunctioning water valve can help you restore water flow to your Whirlpool appliance. Here's how to replace the Whirlpool WP8541697 valve:
Materials Needed:
• Phillips head screwdriver
• Flathead screwdriver
• Adjustable wrench
• New Whirlpool WP8541697 valve
Instructions:
1. Start by turning off all electricity and water supply to the appliance. Disconnect the power cord from the wall outlet and shut off the main water supply valve.
2. Remove the access panel on the back of the appliance. This will expose the water inlet valve.
3. Use a Phillips head screwdriver to unscrew the two mounting screws securing the valve to the appliance.
4. Carefully slide the water inlet valve out of the appliance and set it aside.
5. Take your new Whirlpool WP8541697 valve and insert it into the opening, making sure it is properly seated.
6. Use the Phillips head screwdriver to re-secure the valve to the appliance.
7. Turn the water supply back on and then check for leaks. If there are no leaks, reconnect the power cord and turn the electricity back on.
8. Test the appliance to ensure the new valve is working properly.
You've successfully replaced the Whirlpool WP8541697 valve. Congrats!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review