Online Sale!
100% Guaranteed Genuine Parts
WP8181846 Whirlpool Washer Door Handle
This Front Load Washer Door Handle in platinum (light grey) is designed for use with select models; check to see if your washer is compatible. If the current handle of your appliance is cracked, stained or broken, replacing this part may alleviate these issues. Note that the mounting screws (item WP3400805) are not included, but are available for purchase separately. Replacing this part will require no disassembly or repair experience. You must unplug the appliance or shut off the house circuit breaker before installing.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Front Load Washer Door Handle
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Front Load Washer Door Handle
• Tools Needed: Multi screwdriver
Weight : 0.141100 lbs
Dimension : 5.275500 x 3.149600 x 1.181100
Compatible Brands
About this product
This Front Load Washer Door Handle in platinum (light grey) is designed for use with select models; check to see if your washer is compatible. If the current handle of your appliance is cracked, stained or broken, replacing this part may alleviate these issues. Note that the mounting screws (item WP3400805) are not included, but are available for purchase separately. Replacing this part will require no disassembly or repair experience. You must unplug the appliance or shut off the house circuit breaker before installing.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Front Load Washer Door Handle
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Front Load Washer Door Handle
• Tools Needed: Multi screwdriver
Weight : 0.141100 lbs
Dimension : 5.275500 x 3.149600 x 1.181100
The following parts are replaced by this product
- 8181846
No more associated models for this part.
DIY Guide to Replacing a Whirlpool WP8181846 Handle
Step 1: Prepare the Area
Before you start working on replacing your Whirlpool WP8181846 handle, make sure you have adequate workspace and lighting. Gather the necessary tools and supplies including a flat-head screwdriver, Phillips head screwdriver, and the new handle.
Step 2: Access the Handle
To gain access to the handle, you will need to remove the screws located at the top and bottom of the front panel. Use the appropriate screwdriver to unscrew the screws. Once all the screws are removed, carefully lift the panel from the cabinet opening to expose the handle.
Step 3: Remove Old Handle
The handle is connected to the door via two screws. Using the appropriate screwdriver, remove these screws and set them aside. Once the screws are removed, slide the handle off of the door, being careful not to damage it.
Step 4: Install New Handle
Take the new handle and slide it onto the door. Reconnect the screws and secure the handle into place. Make sure the handle is firmly secured before moving on.
Step 5: Reinstall Panel
Once the handle is in place, you can reinstall the panel by sliding it into the cabinet opening. Replace the screws and make sure they are tightly secured.
Step 6: Test and Enjoy
Once the panel is secure, test the handle to ensure it operates as it should. If everything works properly, then you are done! You can now enjoy your newly replaced Whirlpool WP8181846 handle.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Step 1: Prepare the Area
Before you start working on replacing your Whirlpool WP8181846 handle, make sure you have adequate workspace and lighting. Gather the necessary tools and supplies including a flat-head screwdriver, Phillips head screwdriver, and the new handle.
Step 2: Access the Handle
To gain access to the handle, you will need to remove the screws located at the top and bottom of the front panel. Use the appropriate screwdriver to unscrew the screws. Once all the screws are removed, carefully lift the panel from the cabinet opening to expose the handle.
Step 3: Remove Old Handle
The handle is connected to the door via two screws. Using the appropriate screwdriver, remove these screws and set them aside. Once the screws are removed, slide the handle off of the door, being careful not to damage it.
Step 4: Install New Handle
Take the new handle and slide it onto the door. Reconnect the screws and secure the handle into place. Make sure the handle is firmly secured before moving on.
Step 5: Reinstall Panel
Once the handle is in place, you can reinstall the panel by sliding it into the cabinet opening. Replace the screws and make sure they are tightly secured.
Step 6: Test and Enjoy
Once the panel is secure, test the handle to ensure it operates as it should. If everything works properly, then you are done! You can now enjoy your newly replaced Whirlpool WP8181846 handle.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review