WP74010858 Whirlpool Ignition Switch

DIY Instructions for Replacing the Whirlpool WP74010858 SWITCH- SPIN

Replacing a washing machine switch-spin can be a daunting task, but it’s not as difficult as it may seem. In this guide, we’ll walk you through the steps of replacing the Whirlpool WP74010858 with ease. With the right tools and directions, you’ll be able to replace the switch-spin quickly and safely.

Tools You Will Need

• Phillips screwdriver

• Flathead screwdriver

• Socket wrench

• Pliers

• Replacement Whirlpool WP74010858

Instructions

1. Unplug the washing machine from the wall socket.

2. Remove the screws that secure the lid in place with a Phillips screwdriver.

3. When the lid is removed, locate the switch-spin and disconnect the wires connecting it to the power source.

4. Unscrew the switch-spin with a socket wrench and remove it from the washer.

5. Carefully insert the new switch-spin into the slot and secure it with the socket wrench.

6. Reconnect the wires from the power source to the switch-spin.

7. Test the new switch-spin by running a spin cycle on the machine.

8. Reattach the lid of the washing machine and secure it in place by screwing the screws back in.

9. Plug the washing machine back in and turn it on.

Congratulations! You have successfully replaced the Whirlpool WP74010858 SWITCH-SPIN. Following these simple steps can help you easily replace any washing machine switch-spin.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.