Online Sale!
100% Guaranteed Genuine Parts
WP74010857 Whirlpool Cooktop Ignition Switch
WP74010857 Whirlpool Cooktop Spark Ignition Switch
Weight : 0.014400 lbs
Dimension : 1.660000 x 1.120000 x 1.120000
Compatible Brands
About this product
WP74010857 Whirlpool Cooktop Spark Ignition Switch
Weight : 0.014400 lbs
Dimension : 1.660000 x 1.120000 x 1.120000
The following parts are replaced by this product
- 74010857
No more associated models for this part.
1. Start by turning off the power to the appliance. Remove the back panel of the appliance to reveal the switch.
2. Disconnect the two wires connected to the existing switch. Carefully remove the old switch from the appliance.
3. Install the new switch in the same location as the old one. Connect the two wires connected to the switch. Secure the switch with screws as needed.
4. Turn the power back on to the appliance. Test the new switch to make sure it works properly. Replace the back panel of the appliance.
5. Now that you have replaced the Whirlpool WP74010857 Switch- SPST, your appliance should be up and running again!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Disconnect the two wires connected to the existing switch. Carefully remove the old switch from the appliance.
3. Install the new switch in the same location as the old one. Connect the two wires connected to the switch. Secure the switch with screws as needed.
4. Turn the power back on to the appliance. Test the new switch to make sure it works properly. Replace the back panel of the appliance.
5. Now that you have replaced the Whirlpool WP74010857 Switch- SPST, your appliance should be up and running again!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review