WP74009217 Whirlpool Control Board
Whirlpool WP74009217 CNTRL-ELEC. This top-of-the-line control board is designed to provide sophisticated quality, reliability, and performance for your range. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Whirlpool WP74009217 CNTRL-ELEC. This top-of-the-line control board is designed to provide sophisticated quality, reliability, and performance for your range. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Write Your Own Review
The following parts are replaced by this product
- 74008662
- 74009150
- 74008663
- 74009215
- 74009216
- 74009217
- 74009214
- 74009153
- 74008664
Step 1: Unplug the power cord from the wall outlet and turn off the circuit breaker for the electric range.
Step 2: Remove the top access panel from the range by unscrewing the screws from the back of the range.
Step 3: Remove the oven door and lift out the entire oven cavity.
Step 4: Locate the Whirlpool WP74009217 CNTRL-ELEC on the back of the oven cavity.
Step 5: Unscrew the mounting screws holding the control board in place.
Step 6: Unplug the wiring harnesses and then remove the control board.
Step 7: Install the new Whirlpool WP74009217 CNTRL-ELEC control board by reversing the steps you used to remove the old board.
Step 8: Securely fasten all screws, plugs, and wires.
Step 9: Replace the oven cavity and oven door.
Step 10: Put the top access panel back in place and secure it with the screws.
Step 11: Reconnect the power cord to the range and turn the circuit breaker on.
Step 12: Test the range to ensure the new Whirlpool WP74009217 CNTRL-ELEC works properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Step 2: Remove the top access panel from the range by unscrewing the screws from the back of the range.
Step 3: Remove the oven door and lift out the entire oven cavity.
Step 4: Locate the Whirlpool WP74009217 CNTRL-ELEC on the back of the oven cavity.
Step 5: Unscrew the mounting screws holding the control board in place.
Step 6: Unplug the wiring harnesses and then remove the control board.
Step 7: Install the new Whirlpool WP74009217 CNTRL-ELEC control board by reversing the steps you used to remove the old board.
Step 8: Securely fasten all screws, plugs, and wires.
Step 9: Replace the oven cavity and oven door.
Step 10: Put the top access panel back in place and secure it with the screws.
Step 11: Reconnect the power cord to the range and turn the circuit breaker on.
Step 12: Test the range to ensure the new Whirlpool WP74009217 CNTRL-ELEC works properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
