WP4-60040-004 Whirlpool Crisper Drawer Upper

Step 1: Preparing to Replace the Crisper Drawer
-Unplug or shut off the power to the refrigerator.
-Gather the necessary tools and a new WP4-60040-004 Whirlpool Crisper Drawer, Upper.

Step 2: Removing the Old Crisper Drawer
-Pull out the shelf and remove the shelves on both sides of the crisper drawer.
-Open the crisper drawer and empty it completely.
-Remove the screws from the corner and side supports of the drawer.
-Lift up the old drawer to remove it from the track.

Step 3: Installing the New Crisper Drawer
-Take the new drawer and slide it into the tracks, making sure the corners are facing outward.
-Replace the side supports and secure them with the screws you removed earlier.
-Place the shelves on the side walls and push them back into place.
-Make sure that the drawer is secured properly and close the drawer.

Step 4: Finishing Up
-Restore power to the refrigerator and test the new crisper drawer.
-Ensure the drawer is moving properly and is securely in place.
-Congratulations, you have successfully replaced the WP4-60040-004 Whirlpool Crisper Drawer, Upper!

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.