WP2315539 Whirlpool Refrigerator Evaporator Fan Motor
The SxS Refrigerator Evaporator Fan Motor circulates the cold air from the freezer into the fresh food compartment of the refrigerator for sufficient cooling. This part features an incorporated wire harness. If you hear a lot of noise in the freezer area of your appliance, replacing this part may alleviate the issue. Replacing this part will require basic hand tools, some disassembly of the refrigerator and novice repair experience. You must unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part. Also turn off the refrigerator's water supply before you begin. Helpful Tip: Don’t forget to transfer the two rubber grommets over from the old motor to the new for mounting.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) SxS Refrigerator Evaporator Fan Motor
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) SxS Refrigerator Evaporator Fan Motor
• Tools Needed: Multi screwdriver
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
The SxS Refrigerator Evaporator Fan Motor circulates the cold air from the freezer into the fresh food compartment of the refrigerator for sufficient cooling. This part features an incorporated wire harness. If you hear a lot of noise in the freezer area of your appliance, replacing this part may alleviate the issue. Replacing this part will require basic hand tools, some disassembly of the refrigerator and novice repair experience. You must unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part. Also turn off the refrigerator's water supply before you begin. Helpful Tip: Don’t forget to transfer the two rubber grommets over from the old motor to the new for mounting.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) SxS Refrigerator Evaporator Fan Motor
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) SxS Refrigerator Evaporator Fan Motor
• Tools Needed: Multi screwdriver
Write Your Own Review
The following parts are replaced by this product
- 2219689
- 2315539
- W10438708
Replacing the WP2315539 Whirlpool Evaporator Fan Motor
DIY instructions for replacing a WP2315539 Whirlpool Evaporator Fan Motor:
1. Before beginning any repair work, always turn off the power to the appliance and unplug it from the wall outlet.
2. Slide the range out from the wall and remove the rear access panel from the refrigerator by unscrewing the screws attaching it to the back of the unit.
3. Locate the evaporator fan motor within the refrigerator as indicated in your model's manual.
4. Unplug the wiring harness from the fan motor.
5. Remove the screws securing the fan motor in place.
6. Remove the old fan motor and replace it with the new one.
7. Reconnect the wiring harness to the new fan motor.
8. Secure the new fan motor in place using the screws.
9. Replace the rear access panel and slide the refrigerator back into place.
10. Turn the power back on and check to make sure the fan motor is working properly.
These DIY instructions should help to replace the WP2315539 Whirlpool Evaporator Fan Motor. Remember to always take extra precaution when working with electricity and only attempt this repair if you are confident and competent in doing so.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
DIY instructions for replacing a WP2315539 Whirlpool Evaporator Fan Motor:
1. Before beginning any repair work, always turn off the power to the appliance and unplug it from the wall outlet.
2. Slide the range out from the wall and remove the rear access panel from the refrigerator by unscrewing the screws attaching it to the back of the unit.
3. Locate the evaporator fan motor within the refrigerator as indicated in your model's manual.
4. Unplug the wiring harness from the fan motor.
5. Remove the screws securing the fan motor in place.
6. Remove the old fan motor and replace it with the new one.
7. Reconnect the wiring harness to the new fan motor.
8. Secure the new fan motor in place using the screws.
9. Replace the rear access panel and slide the refrigerator back into place.
10. Turn the power back on and check to make sure the fan motor is working properly.
These DIY instructions should help to replace the WP2315539 Whirlpool Evaporator Fan Motor. Remember to always take extra precaution when working with electricity and only attempt this repair if you are confident and competent in doing so.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
