W11573369 Whirlpool Upper Wash Arm Support
Whirlpool W11573369 COVER . We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Whirlpool W11573369 COVER . We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Write Your Own Review
The following parts are replaced by this product
- W10500299
Step-by-Step DIY Instructions on Replacing the Whirlpool W11573369 COVER SHIELD
1. Turn off power to the dishwasher before beginning work: Unplug the power cord and/or turn off at the circuit breaker.
2. Remove the old cover shield: Open the dishwasher door and use a screwdriver to remove the screws at the top and bottom edges of the old cover shield. Once the screws have been removed, pull out the old cover shield from its mountings.
3. Prepare the new cover shield: Ensure that the new cover shield is of the same size and model as the one you replaced.
4. Install the new cover shield: Place the new cover shield over the mounting holes, securing with the screws removed in the previous step.
5. Test the new cover shield: Close the dishwasher door and switch on the power. Check that the cover shield is securely in place.
6. Clean up and finish off: Dispose of the old cover shield and any debris generated during the replacement process.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Turn off power to the dishwasher before beginning work: Unplug the power cord and/or turn off at the circuit breaker.
2. Remove the old cover shield: Open the dishwasher door and use a screwdriver to remove the screws at the top and bottom edges of the old cover shield. Once the screws have been removed, pull out the old cover shield from its mountings.
3. Prepare the new cover shield: Ensure that the new cover shield is of the same size and model as the one you replaced.
4. Install the new cover shield: Place the new cover shield over the mounting holes, securing with the screws removed in the previous step.
5. Test the new cover shield: Close the dishwasher door and switch on the power. Check that the cover shield is securely in place.
6. Clean up and finish off: Dispose of the old cover shield and any debris generated during the replacement process.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
