W11475670 Whirlpool Crisper Drawer
Part #: WPL W11475670
Whirlpool W11475670 PAN-CRISPR-. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Whirlpool W11475670 PAN-CRISPR-. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Write Your Own Review
The following parts are replaced by this product
- 2263086
- WP2263086
DIY Replacing the Whirlpool W11475670 PAN-CRISPR
Replacing your Whirlpool W11475670 PAN-CRISPR can be a simple DIY repair project that is easy to complete with a few basic tools. This guide will walk you through the steps to safely and successfully replace your PAN-CRISPR.
Materials Needed
• Flathead screwdriver
• Phillips head screwdriver
• New PAN-CRISPR
Instructions
1. Unplug the dishwasher from the power outlet, and turn off any water supplies connected to the appliance.
2. Remove the screws that secure the toe kick plate to the bottom of the dishwasher.
3. Pull out the toe kick plate and locate the PAN-CRISPR underneath the appliance.
4. Use the flathead screwdriver to loosen the mounting bracket that holds the PAN-CRISPR.
5. Next, use the Phillips head screwdriver to remove the screws that secure the PAN-CRISPR in place.
6. Pull the PAN-CRISPR out of the dishwasher and discard it.
7. Insert the new PAN-CRISPR into the dishwasher, making sure it is properly seated.
8. Secure the PAN-CRISPR in place with the screws and mounting bracket.
9. Replace the toe kick plate and re-secure it with the screws.
10. Finally, turn on the water supplies and plug the dishwasher back into the power outlet.
Your dishwasher is now ready for use with a brand new PAN-CRISPR!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing your Whirlpool W11475670 PAN-CRISPR can be a simple DIY repair project that is easy to complete with a few basic tools. This guide will walk you through the steps to safely and successfully replace your PAN-CRISPR.
Materials Needed
• Flathead screwdriver
• Phillips head screwdriver
• New PAN-CRISPR
Instructions
1. Unplug the dishwasher from the power outlet, and turn off any water supplies connected to the appliance.
2. Remove the screws that secure the toe kick plate to the bottom of the dishwasher.
3. Pull out the toe kick plate and locate the PAN-CRISPR underneath the appliance.
4. Use the flathead screwdriver to loosen the mounting bracket that holds the PAN-CRISPR.
5. Next, use the Phillips head screwdriver to remove the screws that secure the PAN-CRISPR in place.
6. Pull the PAN-CRISPR out of the dishwasher and discard it.
7. Insert the new PAN-CRISPR into the dishwasher, making sure it is properly seated.
8. Secure the PAN-CRISPR in place with the screws and mounting bracket.
9. Replace the toe kick plate and re-secure it with the screws.
10. Finally, turn on the water supplies and plug the dishwasher back into the power outlet.
Your dishwasher is now ready for use with a brand new PAN-CRISPR!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.