Online Sale!
100% Guaranteed Genuine Parts
W11454738 Whirlpool Transmission
Whirlpool W11454738 GEARCASE (DW1) We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.000000 lbs
Compatible Brands
About this product
Whirlpool W11454738 GEARCASE (DW1) We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.000000 lbs
The following parts are replaced by this product
- W11131260
No more associated models for this part.
Replacing the Whirlpool W11454738 GEARCASE (DW1):
Step 1: Unplug your dishwasher from any electrical outlets and turn off the water source.
Step 2: Remove the lower dishrack.
Step 3: Locate and remove the screws that are securing the door to the dishwasher body. There should be four in total.
Step 4: Carefully open the door and prop it open with a wooden dowel or something that won’t break it.
Step 5: Remove the bottom access panel located beneath the front of the dishwasher.
Step 6: Disconnect the wiring harnesses and the water line leading to the gearcase.
Step 7: Disconnect the mounting bolts that are holding the gearcase in place.
Step 8: Remove the old gearcase and install the new one.
Step 9: Secure it with the mounting bolts and make sure all the connectors are properly connected.
Step 10: Replace the bottom access panel and reassemble the door. Make sure the screws are tight.
Step 11: Turn the water source back on and plug the dishwasher back in.
Step 12: Test the dishwasher and make sure it’s working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Step 1: Unplug your dishwasher from any electrical outlets and turn off the water source.
Step 2: Remove the lower dishrack.
Step 3: Locate and remove the screws that are securing the door to the dishwasher body. There should be four in total.
Step 4: Carefully open the door and prop it open with a wooden dowel or something that won’t break it.
Step 5: Remove the bottom access panel located beneath the front of the dishwasher.
Step 6: Disconnect the wiring harnesses and the water line leading to the gearcase.
Step 7: Disconnect the mounting bolts that are holding the gearcase in place.
Step 8: Remove the old gearcase and install the new one.
Step 9: Secure it with the mounting bolts and make sure all the connectors are properly connected.
Step 10: Replace the bottom access panel and reassemble the door. Make sure the screws are tight.
Step 11: Turn the water source back on and plug the dishwasher back in.
Step 12: Test the dishwasher and make sure it’s working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review