W11449889 Whirlpool Glass Shelf
Drawer cover insert works with some Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models of fridges.
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Drawer cover insert works with some Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models of fridges.
Write Your Own Review
The following parts are replaced by this product
- W11226452
## Replacing the Whirlpool W11449889 SHELF-GLAS
Replacing a shelf-glass in your Whirlpool refrigerator is a simple DIY task that anyone can do in a few easy steps. This guide will provide detailed instructions for removing and replacing the Whirlpool W11449889 SHELF-GLAS.
### Materials Needed
- A new Whirlpool W11449889 SHELF-GLAS
- Phillips head screwdriver
- Ruler
- Pencil
- Soft cloth
### Step 1: Prepare the Refrigerator
The first step is to prepare the refrigerator for the replacement. Start by unplugging the refrigerator from the wall outlet, and then remove any food items that may be stored on or around the shelf-glass. Once complete, use the faint pencil markings drawn on the frame to identify where the screws are located that secure the shelf-glass.
### Step 2: Remove the Shelf-Glass
Using the Phillips head screwdriver, start by removing all of the screws that secure the shelf-glass. As you remove each screw, carefully place it in a bowl or cup so they don’t get lost. Once all of the screws have been removed, carefully remove the shelf-glass from the refrigerator. Make sure you lift it out of the fridge slowly and without exerting too much pressure, as this can cause the glass to break.
### Step 3: Clean the Frame
Once the shelf-glass has been removed, use the soft cloth to wipe down the frame and make sure there is no dirt or other particles that may be obstructing the installation. Use a ruler to ensure that the frame does not have any bends or dents from where the shelf-glass was removed.
### Step 4: Install the New Shelf-Glass
Now it’s time to install the new shelf-glass. Start by gently placing the Whirlpool W11449889 SHELF-GLAS into the frame. Be sure to check that the shelf-glass is level before moving onto the next step.
Once the shelf-glass is in position, use the Phillips head screwdriver to secure the shelf-glass back into the frame. Carefully replace each screw, being sure not to overtighten them. Once all of the screws are secured, the shelf-glass is now ready to be used again.
### Step 5: Enjoy Your New Shelf-Glass
Your Whirlpool refrigerator is now ready for use with the new shelf-glass installed. Make sure to move the food back into its place and to plug the refrigerator back into the wall outlet. Enjoy your new look!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing a shelf-glass in your Whirlpool refrigerator is a simple DIY task that anyone can do in a few easy steps. This guide will provide detailed instructions for removing and replacing the Whirlpool W11449889 SHELF-GLAS.
### Materials Needed
- A new Whirlpool W11449889 SHELF-GLAS
- Phillips head screwdriver
- Ruler
- Pencil
- Soft cloth
### Step 1: Prepare the Refrigerator
The first step is to prepare the refrigerator for the replacement. Start by unplugging the refrigerator from the wall outlet, and then remove any food items that may be stored on or around the shelf-glass. Once complete, use the faint pencil markings drawn on the frame to identify where the screws are located that secure the shelf-glass.
### Step 2: Remove the Shelf-Glass
Using the Phillips head screwdriver, start by removing all of the screws that secure the shelf-glass. As you remove each screw, carefully place it in a bowl or cup so they don’t get lost. Once all of the screws have been removed, carefully remove the shelf-glass from the refrigerator. Make sure you lift it out of the fridge slowly and without exerting too much pressure, as this can cause the glass to break.
### Step 3: Clean the Frame
Once the shelf-glass has been removed, use the soft cloth to wipe down the frame and make sure there is no dirt or other particles that may be obstructing the installation. Use a ruler to ensure that the frame does not have any bends or dents from where the shelf-glass was removed.
### Step 4: Install the New Shelf-Glass
Now it’s time to install the new shelf-glass. Start by gently placing the Whirlpool W11449889 SHELF-GLAS into the frame. Be sure to check that the shelf-glass is level before moving onto the next step.
Once the shelf-glass is in position, use the Phillips head screwdriver to secure the shelf-glass back into the frame. Carefully replace each screw, being sure not to overtighten them. Once all of the screws are secured, the shelf-glass is now ready to be used again.
### Step 5: Enjoy Your New Shelf-Glass
Your Whirlpool refrigerator is now ready for use with the new shelf-glass installed. Make sure to move the food back into its place and to plug the refrigerator back into the wall outlet. Enjoy your new look!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
