W11213913 Whirlpool Grease Filter
Whirlpool W11213913 GREASE FILTER. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Whirlpool W11213913 GREASE FILTER. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Write Your Own Review
Replacing the Whirlpool W11213913 Filter – A Step-by-Step Guide
If you need to replace your Whirlpool W11213913 filter, this step-by-step guide will make sure you get the job done quickly and correctly.
Step 1: Before you begin, shut off the water supply to the refrigerator and unplug the refrigerator from the wall outlet.
Step 2: Locate the filter and remove the cover by twisting it counterclockwise.
Step 3: Pull the old filter out and discard it properly.
Step 4: Insert a new Whirlpool W11213913 filter firmly into the slot until you hear it click into place.
Step 5: Replace the cover and twist clockwise to secure it in place.
Step 6: Turn on the water supply and plug the refrigerator back in.
Step 7: Push the Reset button, if applicable, and flush the system of air by running water through the dispenser for two to three minutes until the water runs clear.
Congratulations! You’ve successfully replaced your Whirlpool W11213913 filter.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
If you need to replace your Whirlpool W11213913 filter, this step-by-step guide will make sure you get the job done quickly and correctly.
Step 1: Before you begin, shut off the water supply to the refrigerator and unplug the refrigerator from the wall outlet.
Step 2: Locate the filter and remove the cover by twisting it counterclockwise.
Step 3: Pull the old filter out and discard it properly.
Step 4: Insert a new Whirlpool W11213913 filter firmly into the slot until you hear it click into place.
Step 5: Replace the cover and twist clockwise to secure it in place.
Step 6: Turn on the water supply and plug the refrigerator back in.
Step 7: Push the Reset button, if applicable, and flush the system of air by running water through the dispenser for two to three minutes until the water runs clear.
Congratulations! You’ve successfully replaced your Whirlpool W11213913 filter.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
