W11165546 Whirlpool Washer Water Inlet Valve
Water inlet valve works with some Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models of washing machines.
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Water inlet valve works with some Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models of washing machines.
Write Your Own Review
The following parts are replaced by this product
- W10758828
- W10839828
DIY Guide to Replacing the W11165546 Whirlpool Washer Water Inlet Valve
Are you looking for an easy and cost-effective way to replace your Whirlpool washer water inlet valve? If so, this guide provides step-by-step instructions to help you complete the job yourself. Read on to learn what you need and how to safely replace your W11165546 Whirlpool Washer Water Inlet Valve quickly and easily.
What You'll Need:
• A new W11165546 Whirlpool Washer Water Inlet Valve
• Phillips head screwdriver
• Plumber’s tape
• Wrench
Step 1: Unplug your washer from the power outlet. Make sure it is completely disconnected before proceeding further.
Step 2: Remove the screws that hold the back of the washing machine cover in place.
Step 3: Pull back the cover and locate the existing water inlet valve.
Step 4: Use the wrench to disconnect any lines that may be connected to the inlet valve. Make sure to keep track of where each line goes when disconnecting them.
Step 5: Unscrew the mounting screws that hold the valve in place and remove the old valve from the washer.
Step 6: Take the new W11165546 Whirlpool Washer Water Inlet Valve and wrap the threads with a few layers of plumber’s tape.
Step 7: Screw the new valve into the washer and reconnect any lines that were previously connected.
Step 8: Put the washer cover back in place and tighten the screws to secure it back to the body of your washer.
Step 9: Plug the washer back in and turn it on to test if the new valve works properly.
Congratulations! You have successfully replaced your W11165546 Whirlpool Washer Water Inlet Valve.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Are you looking for an easy and cost-effective way to replace your Whirlpool washer water inlet valve? If so, this guide provides step-by-step instructions to help you complete the job yourself. Read on to learn what you need and how to safely replace your W11165546 Whirlpool Washer Water Inlet Valve quickly and easily.
What You'll Need:
• A new W11165546 Whirlpool Washer Water Inlet Valve
• Phillips head screwdriver
• Plumber’s tape
• Wrench
Step 1: Unplug your washer from the power outlet. Make sure it is completely disconnected before proceeding further.
Step 2: Remove the screws that hold the back of the washing machine cover in place.
Step 3: Pull back the cover and locate the existing water inlet valve.
Step 4: Use the wrench to disconnect any lines that may be connected to the inlet valve. Make sure to keep track of where each line goes when disconnecting them.
Step 5: Unscrew the mounting screws that hold the valve in place and remove the old valve from the washer.
Step 6: Take the new W11165546 Whirlpool Washer Water Inlet Valve and wrap the threads with a few layers of plumber’s tape.
Step 7: Screw the new valve into the washer and reconnect any lines that were previously connected.
Step 8: Put the washer cover back in place and tighten the screws to secure it back to the body of your washer.
Step 9: Plug the washer back in and turn it on to test if the new valve works properly.
Congratulations! You have successfully replaced your W11165546 Whirlpool Washer Water Inlet Valve.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
