Online Sale!
100% Guaranteed Genuine Parts
BELT
W11162091 Whirlpool Drive Belt
Weight : 0.259000 lbs
Dimension : 5.500000 x 6.125000 x 0.625000
Compatible Brands
About this product
W11162091 Whirlpool Drive Belt
Weight : 0.259000 lbs
Dimension : 5.500000 x 6.125000 x 0.625000
The following parts are replaced by this product
- W10610886
No more associated models for this part.
Replacing the Whirlpool W11162091 Belt: A DIY Guide
If your Whirlpool W11162091 dryer belt has become worn or damaged, replacing it is easy and will keep your dryer running efficiently. Follow this DIY guide to replace the belt in your Whirlpool W11162091 dryer.
Step 1: Unplug your Dryer
Before beginning any repair work, be sure to unplug the power cord from the wall outlet.
Step 2: Remove the Access Panel
Next, remove the access panel located at the bottom of the front of your dryer. This panel is held in place by two screws. Unscrew them and place aside.
Step 3: Disconnect the Belt
Behind the access panel, you’ll see the dryer’s drum and its belt. Carefully disconnect the belt from the motor and the idler pulley. To ensure the drum spins freely during the replacement, use a gloved hand to hold the drum steady.
Step 4: Replace the Belt
With the old belt removed, replace it with the new belt. Make sure to line up the grooves properly with the drum and the pulleys.
Step 5: Reassemble the Access Panel
Once the belt is in place, reattach the access panel and retighten the screws.
Step 6: Test
Plug in your dryer and test it out. Your Whirlpool W11162091 should now run properly.
Congratulations! You have successfully replaced the belt in your Whirlpool W11162091 dryer.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
If your Whirlpool W11162091 dryer belt has become worn or damaged, replacing it is easy and will keep your dryer running efficiently. Follow this DIY guide to replace the belt in your Whirlpool W11162091 dryer.
Step 1: Unplug your Dryer
Before beginning any repair work, be sure to unplug the power cord from the wall outlet.
Step 2: Remove the Access Panel
Next, remove the access panel located at the bottom of the front of your dryer. This panel is held in place by two screws. Unscrew them and place aside.
Step 3: Disconnect the Belt
Behind the access panel, you’ll see the dryer’s drum and its belt. Carefully disconnect the belt from the motor and the idler pulley. To ensure the drum spins freely during the replacement, use a gloved hand to hold the drum steady.
Step 4: Replace the Belt
With the old belt removed, replace it with the new belt. Make sure to line up the grooves properly with the drum and the pulleys.
Step 5: Reassemble the Access Panel
Once the belt is in place, reattach the access panel and retighten the screws.
Step 6: Test
Plug in your dryer and test it out. Your Whirlpool W11162091 should now run properly.
Congratulations! You have successfully replaced the belt in your Whirlpool W11162091 dryer.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review