W11157085 Whirlpool Dishwasher Upper Dishrack Roller Assembly
Upper dishrack roller assembly works with some Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models of dishwashers.
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Upper dishrack roller assembly works with some Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models of dishwashers.
Write Your Own Review
The following parts are replaced by this product
- W10671907
- WPW10671907
Replacing the Whirlpool Dishwasher Upper Dishrack Roller Assembly (W11157085)
DIY Instructions
1. Shut off the power to the dishwasher. Unplug it from its power source or flip the breaker switch that is supplying power to the dishwasher.
2. Carefully open the dishwasher door and make sure that the dishrack is empty. If any dishes remain, remove them and set them aside.
3. Locate the roller assembly on the upper dishrack. It should be located at the back, near the top of the dishrack.
4. Place one hand on either side of the roller assembly and gently pull it away from the dishrack. This will loosen the rollers and allow them to be removed.
5. Pull the rollers out of the dishrack and place them aside.
6. Take the replacement roller assembly (W11157085) and slide it into the track at the back of the dishrack. Make sure that it is securely in place.
7. Push the roller assembly into place until it securely locks into position.
8. Close the dishwasher door and plug the dishwasher back in or turn the circuit breaker back on.
9. Test the dishwasher to ensure that the roller assembly is properly installed and functioning correctly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
DIY Instructions
1. Shut off the power to the dishwasher. Unplug it from its power source or flip the breaker switch that is supplying power to the dishwasher.
2. Carefully open the dishwasher door and make sure that the dishrack is empty. If any dishes remain, remove them and set them aside.
3. Locate the roller assembly on the upper dishrack. It should be located at the back, near the top of the dishrack.
4. Place one hand on either side of the roller assembly and gently pull it away from the dishrack. This will loosen the rollers and allow them to be removed.
5. Pull the rollers out of the dishrack and place them aside.
6. Take the replacement roller assembly (W11157085) and slide it into the track at the back of the dishrack. Make sure that it is securely in place.
7. Push the roller assembly into place until it securely locks into position.
8. Close the dishwasher door and plug the dishwasher back in or turn the circuit breaker back on.
9. Test the dishwasher to ensure that the roller assembly is properly installed and functioning correctly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
