Online Sale!
100% Guaranteed Genuine Parts
ORIFICE
W11126051 Whirlpool Conversion Kit
Weight : 0.014400 lbs
Dimension : 1.500000 x 0.500000 x 0.500000
Compatible Brands
About this product
W11126051 Whirlpool Conversion Kit
Weight : 0.014400 lbs
Dimension : 1.500000 x 0.500000 x 0.500000
The following parts are replaced by this product
- W10566537
No more associated models for this part.
How to Replace the Whirlpool W11126051 ORIFICE HOSE
Replacing the Whirlpool W11126051 ORIFICE HOSE can be a simple DIY project. Follow these steps to get the job done:
Step 1: Unplug the dryer cord from the wall outlet and turn off the breaker to the dryer if applicable.
Step 2: Pull the dryer away from the wall, remove the back panel, and locate the orifice hose.
Step 3: Use pliers to loosen the clamp holding the orifice hose in place. Once the clamp is removed, disconnect the hose from the gas valve.
Step 4: Clean any surrounding area where the orifice hose attaches. Then apply Pipe Joint Compound to the end of the orifice hose that will connect to the gas valve.
Step 5: Reattach the orifice hose to the gas valve and secure it with the clamp you previously removed. Tighten the clamp with pliers.
Step 6: Make sure the orifice hose is properly connected and replace the back panel.
Step 7: Return the dryer to the wall and plug in the cord. Restore the power to the dryer and test to see if the new orifice hose is working properly.
Now that you know how to replace the Whirlpool W11126051 ORIFICE HOSE, you can complete this job yourself quickly and easily.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing the Whirlpool W11126051 ORIFICE HOSE can be a simple DIY project. Follow these steps to get the job done:
Step 1: Unplug the dryer cord from the wall outlet and turn off the breaker to the dryer if applicable.
Step 2: Pull the dryer away from the wall, remove the back panel, and locate the orifice hose.
Step 3: Use pliers to loosen the clamp holding the orifice hose in place. Once the clamp is removed, disconnect the hose from the gas valve.
Step 4: Clean any surrounding area where the orifice hose attaches. Then apply Pipe Joint Compound to the end of the orifice hose that will connect to the gas valve.
Step 5: Reattach the orifice hose to the gas valve and secure it with the clamp you previously removed. Tighten the clamp with pliers.
Step 6: Make sure the orifice hose is properly connected and replace the back panel.
Step 7: Return the dryer to the wall and plug in the cord. Restore the power to the dryer and test to see if the new orifice hose is working properly.
Now that you know how to replace the Whirlpool W11126051 ORIFICE HOSE, you can complete this job yourself quickly and easily.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review