W11116990 Whirlpool Microwave Button Holder
Button holder works with some Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models of microwaves.
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Button holder works with some Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models of microwaves.
Write Your Own Review
The following parts are replaced by this product
- W10251250
- WPW10251250
- 461968948722
Replacing the W11116990 Whirlpool Microwave Button Holder
Are you having difficulty using or pressing the buttons on your Whirlpool microwave? It may be because the button holder has come loose or been damaged. Replacing the button holder of your microwave is a DIY job that can be completed in a few easy steps. To get your microwave back up and running in no time, follow the instructions below:
1. Unplug the microwave from the wall outlet and remove it from any mounting fixtures.
2. Remove the outer cabinet by removing the screws/bolts at the four corners of the cabinet.
3. Take off the metal plate, which is located at the top of the control panel. There should be 4 screws that you need to remove to take off the metal plate.
4. Inside the control panel, you will see the button holder assembly. Unscrew the screws that hold it in place. Once the screws are removed, pull out the entire button holder assembly.
5. Take the new button holder assembly (part W11116990) and insert it into the control panel. Secure it by putting back the screws.
6. Place the metal plate back on the top of the control panel.
7. Put the outer cabinet screws/bolts back in place.
8. Mount the microwave back into its original fixtures.
9. Plug the microwave back into the wall outlet and test it out.
By following the above steps, you can replace the W11116990 Whirlpool microwave button holder easily and quickly. Be sure to use appropriate safety precautions and wear protective gear whenever necessary to ensure your safety.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Are you having difficulty using or pressing the buttons on your Whirlpool microwave? It may be because the button holder has come loose or been damaged. Replacing the button holder of your microwave is a DIY job that can be completed in a few easy steps. To get your microwave back up and running in no time, follow the instructions below:
1. Unplug the microwave from the wall outlet and remove it from any mounting fixtures.
2. Remove the outer cabinet by removing the screws/bolts at the four corners of the cabinet.
3. Take off the metal plate, which is located at the top of the control panel. There should be 4 screws that you need to remove to take off the metal plate.
4. Inside the control panel, you will see the button holder assembly. Unscrew the screws that hold it in place. Once the screws are removed, pull out the entire button holder assembly.
5. Take the new button holder assembly (part W11116990) and insert it into the control panel. Secure it by putting back the screws.
6. Place the metal plate back on the top of the control panel.
7. Put the outer cabinet screws/bolts back in place.
8. Mount the microwave back into its original fixtures.
9. Plug the microwave back into the wall outlet and test it out.
By following the above steps, you can replace the W11116990 Whirlpool microwave button holder easily and quickly. Be sure to use appropriate safety precautions and wear protective gear whenever necessary to ensure your safety.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
