Online Sale!
100% Guaranteed Genuine Parts
PUMP&MOTOR
Pump and motor assembly works with some Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models of dishwashers.
Weight : 17.266200 lbs
Dimension : 16.000000 x 15.000000 x 9.880000
Compatible Brands
About this product
Pump and motor assembly works with some Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models of dishwashers.
Weight : 17.266200 lbs
Dimension : 16.000000 x 15.000000 x 9.880000
No more associated models for this part.
Replacing the W11087376 Whirlpool Dishwasher Pump and Motor Assembly
Are you looking to replace your Whirlpool dishwasher pump and motor assembly? If so, this is an easy DIY repair that can be done in just a few steps. Read on for instructions on how to replace the W11087376 Whirlpool dishwasher pump and motor assembly.
1. Turn off the power supply to the dishwasher. Make sure that your dishwasher is unplugged from the wall outlet before beginning any repair work.
2. Unscrew the top screws from the dishwasher cover, then lift the cover up and off to access the inner workings of the machine.
3. Find the pump and motor assembly. This is typically located at the bottom of the dishwasher near the drain hose.
4. Disconnect all hoses and electrical connections to the motor.
5. Use a screwdriver to remove the mounting screws that hold the motor in place.
6. With the screws removed, carefully pull the motor assembly out of the dishwasher and set it aside.
7. Take your new pump and motor assembly and carefully slide it into the space left by the old motor.
8. Reconnect all of the hoses and wiring to the new motor.
9. Secure the motor in place with the screws that were removed earlier. Make sure that the screws are tightly secured.
10. Replace the dishwasher cover and secure it with the top screws.
11. Plug the dishwasher back in and turn on the power supply.
Your Whirlpool dishwasher pump and motor assembly replacement is now complete. Now you can enjoy your newly repaired dishwasher once again.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Are you looking to replace your Whirlpool dishwasher pump and motor assembly? If so, this is an easy DIY repair that can be done in just a few steps. Read on for instructions on how to replace the W11087376 Whirlpool dishwasher pump and motor assembly.
1. Turn off the power supply to the dishwasher. Make sure that your dishwasher is unplugged from the wall outlet before beginning any repair work.
2. Unscrew the top screws from the dishwasher cover, then lift the cover up and off to access the inner workings of the machine.
3. Find the pump and motor assembly. This is typically located at the bottom of the dishwasher near the drain hose.
4. Disconnect all hoses and electrical connections to the motor.
5. Use a screwdriver to remove the mounting screws that hold the motor in place.
6. With the screws removed, carefully pull the motor assembly out of the dishwasher and set it aside.
7. Take your new pump and motor assembly and carefully slide it into the space left by the old motor.
8. Reconnect all of the hoses and wiring to the new motor.
9. Secure the motor in place with the screws that were removed earlier. Make sure that the screws are tightly secured.
10. Replace the dishwasher cover and secure it with the top screws.
11. Plug the dishwasher back in and turn on the power supply.
Your Whirlpool dishwasher pump and motor assembly replacement is now complete. Now you can enjoy your newly repaired dishwasher once again.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review