
W10712395 Whirlpool Dishrack Adjuster
Part #: WPL W10712395
Whirlpool KitchenAid Roper Amana Jenn-Air Maytag Gaffers and Sattler Magic Chef Sears Kenmore Admiral Dishwasher RACK ADJUSTER W10712395
We are a Factory Authorized Parts Distributor for Whirlpool Maytag. Trust us for all of your Whirlpool Maytag appliance parts and accessories needs.
We are a Factory Authorized Parts Distributor for Whirlpool Maytag. Trust us for all of your Whirlpool Maytag appliance parts and accessories needs.
Whirlpool KitchenAid Roper Amana Jenn-Air Maytag Gaffers and Sattler Magic Chef Sears Kenmore Admiral Dishwasher RACK ADJUSTER W10712395
We are a Factory Authorized Parts Distributor for Whirlpool Maytag. Trust us for all of your Whirlpool Maytag appliance parts and accessories needs.
We are a Factory Authorized Parts Distributor for Whirlpool Maytag. Trust us for all of your Whirlpool Maytag appliance parts and accessories needs.
Write Your Own Review
How to Replace a Whirlpool Dishrack Adjuster (Part #W10712395)
Replacing the dishrack adjuster on your Whirlpool dishwasher is a simple DIY task that can be done in no time. Follow these easy steps to ensure the job is done right:
1. Unplug your dishwasher from its power source. This will ensure that no one gets hurt while you are working on the appliance.
2. Locate the dishrack adjuster. This should be located near the left side panel of your dishwasher.
3. Take out the adjusting hardware for the dishrack. This will usually consist of three or four screws at the top and bottom of the part that needs to be removed.
4. Once the screws are removed, gently pull out the adjuster from the dishwasher.
5. Put the new part in and line up the adjusting hardware holes.
6. Secure the new part in place with the screws.
7. Check to make sure the dishrack adjusts easily.
8. Plug in your dishwasher and turn it on.
Congratulations, you have successfully replaced the Whirlpool Dishrack Adjuster (Part #W10712395). You can now resume using your dishwasher as normal!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing the dishrack adjuster on your Whirlpool dishwasher is a simple DIY task that can be done in no time. Follow these easy steps to ensure the job is done right:
1. Unplug your dishwasher from its power source. This will ensure that no one gets hurt while you are working on the appliance.
2. Locate the dishrack adjuster. This should be located near the left side panel of your dishwasher.
3. Take out the adjusting hardware for the dishrack. This will usually consist of three or four screws at the top and bottom of the part that needs to be removed.
4. Once the screws are removed, gently pull out the adjuster from the dishwasher.
5. Put the new part in and line up the adjusting hardware holes.
6. Secure the new part in place with the screws.
7. Check to make sure the dishrack adjusts easily.
8. Plug in your dishwasher and turn it on.
Congratulations, you have successfully replaced the Whirlpool Dishrack Adjuster (Part #W10712395). You can now resume using your dishwasher as normal!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.


