Online Sale!
100% Guaranteed Genuine Parts
W10472036 Whirlpool Cooktop
This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.
Weight : 68.062500 lbs
Dimension : 34.750000 x 30.250000 x 9.000000
Compatible Brands
About this product
This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.
Weight : 68.062500 lbs
Dimension : 34.750000 x 30.250000 x 9.000000
No more associated models for this part.
DIY Instructions on Replacing a Whirlpool W10239873 Cooktop
1. Make sure to turn off the power to the cooktop at the circuit breaker.
2. Once the power is off, then you can remove the existing cooktop. To do this, start removing the screws that secure the cooktop with a screwdriver. The screws are typically located around the edges of the cooktop.
3. After you have removed all the screws, then you should be able tolift the cooktop away from the countertop.
4. Place the new cooktop in the same area where you removed the old one. Make sure that the new cooktop is correctly aligned with the countertop and that there is enough space for all four burner plates to fit.
5. Secure the cooktop to the countertop with the screws that you removed earlier.
6. Connect the power cable to the cooktop. Turn on the circuit breaker so that the cooktop is receiving power.
7. Test the cooktop to make sure that it works properly.
8. Clean any debris or dirt that has accumulated under the cooktop.
Now your new Whirlpool W10239873 cooktop is ready for use. Enjoy cooking!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Make sure to turn off the power to the cooktop at the circuit breaker.
2. Once the power is off, then you can remove the existing cooktop. To do this, start removing the screws that secure the cooktop with a screwdriver. The screws are typically located around the edges of the cooktop.
3. After you have removed all the screws, then you should be able tolift the cooktop away from the countertop.
4. Place the new cooktop in the same area where you removed the old one. Make sure that the new cooktop is correctly aligned with the countertop and that there is enough space for all four burner plates to fit.
5. Secure the cooktop to the countertop with the screws that you removed earlier.
6. Connect the power cable to the cooktop. Turn on the circuit breaker so that the cooktop is receiving power.
7. Test the cooktop to make sure that it works properly.
8. Clean any debris or dirt that has accumulated under the cooktop.
Now your new Whirlpool W10239873 cooktop is ready for use. Enjoy cooking!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review