Online Sale!
100% Guaranteed Genuine Parts
W10272068 Whirlpool Range Hood Charcoal Filter Set
This set of two Range Hood Charcoal Filters traps grease from the exhaust air of your oven to help prevent it from entering the blower and vent, potentially causing build-up and damage. If your current filter is no longer functioning properly, you should replace it promptly with this item. This charcoal filter is a universal accessory that can be used across several brands; check to see if your model number is compatible. Size of each filter: 7-5/8" diameter by 7/8" thick. Installing this accessory will require basic hand tools, some disassembly of the range hood and novice repair experience. Helpful Tip: Replace your range hood’s filter every 6 months to maximize performance and efficiency.
Part Specification
• This product is a Factory Certified Accessory. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• Package contains (1) Range Hood Replacement Charcoal Filter, 2-Pack
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Accessory. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• Package contains (1) Range Hood Replacement Charcoal Filter, 2-Pack
• Tools Needed: Multi screwdriver
Weight : 2.417300 lbs
Dimension : 7.000000 x 6.000000 x 8.000000
Compatible Brands
About this product
This set of two Range Hood Charcoal Filters traps grease from the exhaust air of your oven to help prevent it from entering the blower and vent, potentially causing build-up and damage. If your current filter is no longer functioning properly, you should replace it promptly with this item. This charcoal filter is a universal accessory that can be used across several brands; check to see if your model number is compatible. Size of each filter: 7-5/8" diameter by 7/8" thick. Installing this accessory will require basic hand tools, some disassembly of the range hood and novice repair experience. Helpful Tip: Replace your range hood’s filter every 6 months to maximize performance and efficiency.
Part Specification
• This product is a Factory Certified Accessory. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• Package contains (1) Range Hood Replacement Charcoal Filter, 2-Pack
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Accessory. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• Package contains (1) Range Hood Replacement Charcoal Filter, 2-Pack
• Tools Needed: Multi screwdriver
Weight : 2.417300 lbs
Dimension : 7.000000 x 6.000000 x 8.000000
Replacing the W10272068 Whirlpool Range Hood Charcoal Filter Set: A DIY Guide
1. Unplug the range hood from the power source.
2. Use a screwdriver to loosen the screws that hold the filter casing in place. Then, remove the damaged filter.
3. Take the new filter out of its package and check it for any defects.
4. Place the new filter inside the range hood, making sure it fits snugly.
5. Tighten the screws to securely hold the filter in place.
6. Reconnect the power source and turn the range hood on.
7. Enjoy your fresh, clean air!
Follow these simple steps to easily replace the W10272068 Whirlpool Range Hood Charcoal Filter Set. Doing so will help keep your kitchen air fresh and free of grease and other pollutants. With regular maintenance, you can enjoy an optimal range hood performance.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Unplug the range hood from the power source.
2. Use a screwdriver to loosen the screws that hold the filter casing in place. Then, remove the damaged filter.
3. Take the new filter out of its package and check it for any defects.
4. Place the new filter inside the range hood, making sure it fits snugly.
5. Tighten the screws to securely hold the filter in place.
6. Reconnect the power source and turn the range hood on.
7. Enjoy your fresh, clean air!
Follow these simple steps to easily replace the W10272068 Whirlpool Range Hood Charcoal Filter Set. Doing so will help keep your kitchen air fresh and free of grease and other pollutants. With regular maintenance, you can enjoy an optimal range hood performance.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review