W10259232 Whirlpool Microwave Stainless Steel Vent Grille
Part #: WPL W10259232
The Whirlpool W10259232 GRILL-VENTILATORWe're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
The Whirlpool W10259232 GRILL-VENTILATORWe're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Write Your Own Review
Instructions on How to Replace a Whirlpool W10259232 GRILL-VENT
1. Begin by shutting off the power supply to the dishwasher at your home’s circuit breaker.
2. Once you have completed this, locate the screws which secure the Grill-Vent cover and unscrew them with a screwdriver.
3. Carefully remove the Grill-Vent cover from the dishwasher; and then locate the two metal clips which secure the vent assembly to the interior of the dishwasher.
4. Unhook these clips with a needle-nosed pliers.
5. Next, slide the vent assembly out of the dishwasher and set it aside, as you will no longer need it.
6. Place the replacement Whirlpool W10259232 Grill-Vent into the dishwasher and make sure it is correctly aligned.
7. Secure the replacement Grill-Vent with the two metal clips.
8. Replace the Grill-Vent cover and secure it with the screws.
9. Finally, turn the power back on to your dishwasher at the circuit breaker.
10. Congratulations! You have successfully replaced the Whirlpool W10259232 Grill-Vent.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Begin by shutting off the power supply to the dishwasher at your home’s circuit breaker.
2. Once you have completed this, locate the screws which secure the Grill-Vent cover and unscrew them with a screwdriver.
3. Carefully remove the Grill-Vent cover from the dishwasher; and then locate the two metal clips which secure the vent assembly to the interior of the dishwasher.
4. Unhook these clips with a needle-nosed pliers.
5. Next, slide the vent assembly out of the dishwasher and set it aside, as you will no longer need it.
6. Place the replacement Whirlpool W10259232 Grill-Vent into the dishwasher and make sure it is correctly aligned.
7. Secure the replacement Grill-Vent with the two metal clips.
8. Replace the Grill-Vent cover and secure it with the screws.
9. Finally, turn the power back on to your dishwasher at the circuit breaker.
10. Congratulations! You have successfully replaced the Whirlpool W10259232 Grill-Vent.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.